Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)The aim of this study is to evaluate the general electrochemical corrosion resistance of Al-Fe alloys in the range of hypoeutectic compositions, Al-0.5 wt.% Fe and Al-1.5 wt.% Fe alloy. EIS plots, potentiodynamic polarization curves and an equivalent circuit analysis were used to evaluate the electrochemical parameters in a 0.5 M NaCl solution at 25 degrees C. It is shown that for an Al-0.5 wt.% Fe alloy, coarse cells tend to improve the corrosion resistance mainly due to the reduction in cellular boundaries and for an Al-1.5 wt.% Fe alloy, an opposite trend has been detected. (C) 2010 Elsevier Ltd. All rights res...
The corrosion resistance of nanocrystalline Al, Al-10 wt. % Fe and Al-10 wt. % Fe-5 wt. % Cr alloys ...
The electrochemical behavior of Al-Mg alloys were studied by means of a potentiostat. Since oxide fi...
Properties of alloys containing up to 12% chromium and 10% aluminum have been determined. Anodic pol...
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Ci...
This paper presents an investigation on the corrosion resistance of iron aluminides FeAl-based alloy...
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do...
The pitting corrosion of 5052 alloy was investigated as function of chloride concentrations by using...
The aim of this study is to compare the electrochemical behavior of three monotectic Al-based alloys...
The AlMg-alloy was made by melting Al and Mg ingot pieces in an alumine crucible, kept in a resistan...
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento d...
Aluminum and its alloys are characterized by low density, high electrical and thermal conductivity, ...
In this study, the corrosion mechanisms of the AA2024-T3 and the AA2098-T351 were investigated and c...
In this study, the corrosion behaviour of two different iron aluminides based on FeAl, with two diff...
In this work, the corrosion behavior of the AA4006 alloy made by the twin roll\ud caster process was...
The aim of this study is to determine the effect of the resulting microstructural array of an as-cas...
The corrosion resistance of nanocrystalline Al, Al-10 wt. % Fe and Al-10 wt. % Fe-5 wt. % Cr alloys ...
The electrochemical behavior of Al-Mg alloys were studied by means of a potentiostat. Since oxide fi...
Properties of alloys containing up to 12% chromium and 10% aluminum have been determined. Anodic pol...
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Ci...
This paper presents an investigation on the corrosion resistance of iron aluminides FeAl-based alloy...
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do...
The pitting corrosion of 5052 alloy was investigated as function of chloride concentrations by using...
The aim of this study is to compare the electrochemical behavior of three monotectic Al-based alloys...
The AlMg-alloy was made by melting Al and Mg ingot pieces in an alumine crucible, kept in a resistan...
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento d...
Aluminum and its alloys are characterized by low density, high electrical and thermal conductivity, ...
In this study, the corrosion mechanisms of the AA2024-T3 and the AA2098-T351 were investigated and c...
In this study, the corrosion behaviour of two different iron aluminides based on FeAl, with two diff...
In this work, the corrosion behavior of the AA4006 alloy made by the twin roll\ud caster process was...
The aim of this study is to determine the effect of the resulting microstructural array of an as-cas...
The corrosion resistance of nanocrystalline Al, Al-10 wt. % Fe and Al-10 wt. % Fe-5 wt. % Cr alloys ...
The electrochemical behavior of Al-Mg alloys were studied by means of a potentiostat. Since oxide fi...
Properties of alloys containing up to 12% chromium and 10% aluminum have been determined. Anodic pol...