The low-frequency internal friction behavior of SiC particle reinforced Al matrix composites was studied over a temperature range from 23°C to 550°C at frequencies of 0.1, 1 and 5 Hz. The experimental data were analyzed in terms of the K-G-L dislocation theory and the anelastic relaxation of grain boundary sliding. Two internal friction peaks of the composites were respectively observed over the temperature ranges of 100~250°C and 200~500°C. The dislocation motion is the important damping mechanism of the composites at low temperatures, while the grain boundary relaxation plays a dominant role at high temperatures. The activation energies for dislocation relaxation and grain boundary sliding are 1.2 eV and 1.57 eV, respectively
The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used at frequencies nea...
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic reinforcemen...
In the present study effect of SiC content and sliding speed on the wear behaviour of aluminium allo...
The thermo-mechanical behavior of aluminum alloys reinforced with SiC particles was investigated by ...
Damping characteristics of 8090 Al alloy and its composites reinforced with 8, 12, and 18 vol pct Si...
The Ti6Al4V–SiCf composite, reinforced by unidirectional SiC fibres (SCS-6), has been investigated b...
Internal friction and dynamic Young modulus measurements have been performed in the temperature ran...
Damping behavior of eutectoid zinc-aluminum composites was studied in the 25 to 330°C temperature ra...
Silicon carbide (SiC) based fiber reinforced SiC composites have been fabricated by various methods ...
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic reinforcemen...
The composite, consisting of Ti6Al4V matrix reinforced by unidirectional SiC fibres (SCS-6), has bee...
The effect of sliding distances on aluminum matrix composite reinforced by silicon carbide particle ...
AbstractIn the present study, the damping behavior of hybrid composites has been investigated using ...
In this presentation, first, the Internal Damping (I.D.) phenomena and related theories that have be...
This article presents an effect of matrix alloy and influence of SiC particle on the sliding wear ch...
The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used at frequencies nea...
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic reinforcemen...
In the present study effect of SiC content and sliding speed on the wear behaviour of aluminium allo...
The thermo-mechanical behavior of aluminum alloys reinforced with SiC particles was investigated by ...
Damping characteristics of 8090 Al alloy and its composites reinforced with 8, 12, and 18 vol pct Si...
The Ti6Al4V–SiCf composite, reinforced by unidirectional SiC fibres (SCS-6), has been investigated b...
Internal friction and dynamic Young modulus measurements have been performed in the temperature ran...
Damping behavior of eutectoid zinc-aluminum composites was studied in the 25 to 330°C temperature ra...
Silicon carbide (SiC) based fiber reinforced SiC composites have been fabricated by various methods ...
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic reinforcemen...
The composite, consisting of Ti6Al4V matrix reinforced by unidirectional SiC fibres (SCS-6), has bee...
The effect of sliding distances on aluminum matrix composite reinforced by silicon carbide particle ...
AbstractIn the present study, the damping behavior of hybrid composites has been investigated using ...
In this presentation, first, the Internal Damping (I.D.) phenomena and related theories that have be...
This article presents an effect of matrix alloy and influence of SiC particle on the sliding wear ch...
The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used at frequencies nea...
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic reinforcemen...
In the present study effect of SiC content and sliding speed on the wear behaviour of aluminium allo...