Statistical mixture design development of digestion methods for Oyster tissue using inductively coupled plasma optical emission spectrometry for the determination of metallic ions

The quantitative determination of chemical elements in organic or biological samples is an important analytical problem. Normally the elements to be determined in the organic matrix must be transformed into a simple inorganic form. A digestion method by heating on a block digestor has been developed for the determination of Al, As, Ba, Ca, Cd, Co, Cu, Fe, Mg, Mn, V and Zn in Oyster tissue by ICP OES. A simplex centroid statistical mixture design has been used to study the effects of changing HNO(3), HCll and H(2)O(2) reagent proportions on the digestion of these samples. Response surface and principal component analyses show that the species Ca, Cd, Cu, Fe, Mg, Mn and Zn have very similar analytical tendencies under this experiment. By means of mixture modeling maximum recoveries for these ions were predicted using 19%,18% and 63% of the HCl, HNO(3) and H(2)O(2) pseuclocomponent mixtures, respectively. This corresponds to 21.4%,30.8% and 47.8% of the HCl, HNO(3) and H(2)O(2) commercial solutions. Furthermore the As, Co and V ions present large recoveries for these mixtures as well. The Al and Ba ion recoveries are seen to be independent of the mixture proportions. The analysis of Oyster tissue reference material (SRM 1566b - NIST) under optimized conditions at the selected wavelengths resulted in ion recoveries between 90% and 100%. (C) 2009 Elsevier B.V. All rights reserved.80255956