The Use Of Artificial Intelligence Technique For The Optimisation Of Process Parameters Used In The Continuous Casting Of Steel

The productivity and quality of a continuous caster depend mainly on process parameters, i.e. casting speed, casting temperature, steel composition and cleanliness of the melt, water flow rates in the different cooling zones, etc. This work presents the development of an algorithm, which incorporates heuristic search techniques for direct application in metallurgical industries, particularly those using continuous casting process for the production of steel billets and slabs. This is done to determine the casting objectives of maximum casting rate as a function of casting constraints. These constraints are evaluated with the aid of a heat transfer and solidification model based on the finite difference technique, which has been developed and integrated with a genetic algorithm. The essential parts of continuous casting equipment, which must be subjected to monitoring, as well as a methodology of mathematical model and physical settlements in each cooling region, are presented. The efficiency of the intelligent system is assured by the optimisation of the continuous casting operation by maximum casting rate and defect-free products. This approach is applied to the real dimension of a steel continuous caster, in real conditions of operation, demonstrating that good results can be attained by using heuristic search, such as: smaller temperature gradients between sprays zones, reduction in water consumption and an increase in casting speed. © 2002 Elsevier Science Inc. All rights reserved.261110771092Williamson, C.Q., Process control in continuous casting a trend or must (1988) Continuous Casting, 4, pp. 281-287Irving, W.R., On line quality control for continuously cast semis (1990) Ironmaking and Steelmaking, 17 (3), pp. 197-202Kumar, S., Samarasekera, I.V., Brimacombe, J.K., Mould thermal response and formation of defects in the continuous casting of steel billets-laps and bleeds (1997) Iron and Steelmaker, pp. 53-69Samarasekera, I.V., Brimacombe, J.K., Wilder, K., The pursuit of steel billet quality (1994) Iron and Steelmaker, pp. 53-63Kumar, S., Walker, B.N., Samarasekera, I.V., Brimacombe, J.K., Chaos at the meniscus-the genesis of defects in continuously cast steel billets (1993) 13th PTD Conference Proceeding, pp. 119-141Brimacombe, J.K., Empowerment with knowledge--toward the intelligent mould for the continuous casting of steel billets (1993) Iron and Steelmaker, pp. 35-47Kumar, S., Meech, J.A., Samarasekera, I.V., Brimacombe, J.K., Knowledge engineering an expert systems to troubleshoot quality problems in the continuous casting of steel billets (1993) Iron and Steelmaker, pp. 29-36Larreq, M., Birat, J.P., Optimization of casting and cooling conditions on steel continuous casters--implementation of optimal strategies on slab and bloom casters (1982) Application of Mathematical and Physical Models in the Iron and Steel Industry, Iron and Steel Society of ASMEFilipic, B., Sarler, B., Continuous casting simulator--a tool for improved quality and productivity (1997) Proceedings of the 2nd International Metallurgical Conference Continuous Casting of Billets, pp. 161-168. , Trinec, Czech RepublicFilipic, B., Sarler, B., Evolving parameter setting for continuous casting of steel (1998) Proceedings of the 6th European Congress on Intelligent Techniques and Soft Computing--EUFIT'98, 1, pp. 444-449. , Aachen, Germany, Sept 7-10Lally, B., Biegler, L.T., Henein, H., Optimisation and continuous casting: Part I. Problem formulation and solution strategy (1991) Metallurgical Transactions B, 22 B, pp. 641-648Cheung, N., Garcia, A., The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting (2001) Engineering Applications of Artificial Intelligence, 14, pp. 229-238Osman, I.H., Kelly, J.P., Meta-heuristics: An overview (1996) Meta-Heuristics: Theory - Applications, , Kluwer Academic PublishersYagiura, M., Ibaraki, T., Genetic and local search algorithms as robust and simple optimization tools (1996) Meta-Heuristics: Theory - Applications, , Kluwer Academic PublishersRasheed, K., Hirsh, H., Gelsey, A., A genetic algorithm for continuous design space search (1997) Artificial Intelligence in Engineering, 11, pp. 295-305Spim, J.A., Garcia, A., An optimisation of the finite difference method for modeling solidification of complex shapes (1997) Journal of the Brazilian Society of Mechanical Sciences, 19, pp. 392-409Brown, D.E., White, C.C., (1990) Operations Research and Artificial Intelligence: The Integration of Problem-solving Strategies, , Kluwer Academic PublisherApelian, D., Meysel, A., Intelligent processing of materials (1990) The Minerals, pp. 427-434. , H. N. Wadley, & W. E. Eckhart (Eds.), Metals - Materials SocietyBohmer, J.R., Fett, F.N., Modelling of casting welding and advanced solidification process V (1991) The Minerals, p. 337. , M. Rappaz, M. R. Ozgu, & K. Mahin (Eds.), Metals - Materials SocietyMizikar, E.A., Sprays cooling investigation for continuous casting of billets and blooms (1970) Iron and Steel Institute, pp. 53-60Bolle, E., Moureau, J.C., Sprays cooling of hot surfaces: A description of the dispersed phase and a parametric study of heat transfer results (1946) Proceedings of Two Phase Flows and Heat Transfer, 3, pp. 1327-1346. , NATO Advanced Study InstituteKominami, H., Neural network system for breakout prediction in continuous casting process (1991) Nippon Steel Technical Report, 49, pp. 34-38Voller, V.R., Swaminathan, C.R., General source-based method for solidification phase change (1991) Numerical Heat Transfer Part B, 19, p. 175Welty, J.R., (1976) Engineering Heat Transfer, , New York: J. Wiley and Sons In