The high temperature creep behaviour of a 2D SiC/C/SiC composite is studied at temperatures ranging from 1200 to 1673K, under stresses from 50 to 500MPa. Due to the microstructural evolution of the material, steady state creep is never reached ; creep toughening is observed. Microcrack formation and propagation in the interface and in the matrix were identified as contributing to the deformation
Microstructural development of SCS-6 SiC fibers induced by creep deformation at 1400 degrees C is pr...
Creep were performed by three-point bending under vacuum on SICf -SiC and SiCf-MLAS composites. The ...
Abstract Here we consider our four-point flexure and compression creep results obtained under Ar pro...
The high temperature creep behaviour of a 2D SiC/C/SiC composite is studied at temperatures ranging ...
Creep studies have been performed on an SIC-C composite under flexural, compressive and tensile load...
In order to further expand the application of SiC/SiC composites in the hot-end components for advan...
A microstructural investigation has been performed by TEM on SiC-SiC materials annealed in air up to...
Fiber bonded silicon carbide ceramic materials provide cost-advantage over traditional ceramic matri...
ABSTRACT- Creep were performed by three-point bending under vacuum on Sic-Sic and Sic-MLAS composite...
The high temperature creep behaviors of Cr3C2 composite were investigated under compressive and bend...
International audienceThis paper deals with the creep mechanism for ceramic matrix composites reinfo...
The mechanical behaviour of a composite of Si3N4 (with 3 % MgO) containing 0-20 % SiC whiskers has b...
SiC-SiC composites are being considered as potential candidate materials for next generation turbine...
Ultra-high temperature ceramics have been considered for several extreme applications involving high...
The present work deals with the development of material constitutive models for creep-deformation an...
Microstructural development of SCS-6 SiC fibers induced by creep deformation at 1400 degrees C is pr...
Creep were performed by three-point bending under vacuum on SICf -SiC and SiCf-MLAS composites. The ...
Abstract Here we consider our four-point flexure and compression creep results obtained under Ar pro...
The high temperature creep behaviour of a 2D SiC/C/SiC composite is studied at temperatures ranging ...
Creep studies have been performed on an SIC-C composite under flexural, compressive and tensile load...
In order to further expand the application of SiC/SiC composites in the hot-end components for advan...
A microstructural investigation has been performed by TEM on SiC-SiC materials annealed in air up to...
Fiber bonded silicon carbide ceramic materials provide cost-advantage over traditional ceramic matri...
ABSTRACT- Creep were performed by three-point bending under vacuum on Sic-Sic and Sic-MLAS composite...
The high temperature creep behaviors of Cr3C2 composite were investigated under compressive and bend...
International audienceThis paper deals with the creep mechanism for ceramic matrix composites reinfo...
The mechanical behaviour of a composite of Si3N4 (with 3 % MgO) containing 0-20 % SiC whiskers has b...
SiC-SiC composites are being considered as potential candidate materials for next generation turbine...
Ultra-high temperature ceramics have been considered for several extreme applications involving high...
The present work deals with the development of material constitutive models for creep-deformation an...
Microstructural development of SCS-6 SiC fibers induced by creep deformation at 1400 degrees C is pr...
Creep were performed by three-point bending under vacuum on SICf -SiC and SiCf-MLAS composites. The ...
Abstract Here we consider our four-point flexure and compression creep results obtained under Ar pro...