Standards For Cmm Verification

Coordinate measuring machine (CMM) verification has been an important issue over the past two decades. Different standards have been proposed which have played a vital role in specifying methods for inspecting CMMs.236492500Knapp, W., Comparison of different artefacts for interim coordinate measuring machine checking (1991) Precision Engineering, 13 (4), pp. 277-291. , October(1989) Accuracy Specification for Coordinate Measuring Machines, , Coordinate Measuring Machine Manufacturers Association(1987) Coordinate Measuring Machines - Glossary of Terms, , BS 6808: part i: British Standards Association(1987) Coordinate Masuring Machines - Methods for Verifying Performance, , BS 6808: part 2: British Standards Association(1989) Coordinate Measuring Machines - Code of Practice, , BS 6808: part 3: British Standards Association(1986) Accuracy of Coordinate Measuring Machines, Characteristics and Their Checking, Part 1: Generalities, , VDI/VDE 2617, Dusseldorf(1986) Accuracy of Coordinate Measuring Machines, Characteristics and Their Checking, Part 2.1: Measurement Task Specific Measurement Uncertainty and Length Measurement Uncertainty, , VDI/VDE 2617, Dusseldorf(1989) Accuracy of Coordinate Measuring Machines, Characteristics Parameters and Their Checking Part 3: Components of Measurement Deviation of the Machine, , VDI/VDE 2617, Dusseldorf(1989) Accuracy of Coordinate Measuring Machines, Characteristics and Their Checking Part 4: Rotary Tables on Coordinate Measuring Machines, , VDI/VDE 2617, Dusseldorf(1991) Genauigkeit von Koordinatenmessgeraten, Kenngrossen und Deren Prufung Blatt 5: Uberwachung Durch Prufkorper, , VDI/VDE 2617, Dusseldorf(1986) Instruments de Measurage Dimensionnel, Machines à Mesurer, , NF E11-150, AFNOR(1989) Koordinatenmesstechnik, Methode zur Nachprufung von Koordinatenmessgeraten, , ONORM M 1385, ON 3-1021, Wien(1990) Methods for Performance Evaluation of Coordinate Measuring Machines, , ANSI/ASME B89-1.12M, the American Society for Mechanical Engineering, New York(1987) Test Code for Accuracy of Coordinate Measuring Machines, , JIS B 7440 Japanese Standards Association(1994) Coordinate Metrology, Part 1: Definitions and Applications of the Fundamental Geometric Principles and Part 2: Performance Assesssment of Coordinate Measuring Machines, , SO 10360-2 International Organisation for StandardisationPhillips, S.D., (1995) Coordinate Measuring Machines and Systems, Chapter 7: Performance Evaluations, , edited by JA Bosch, PP137-226, New York(1989) Renishaw Calibration Interferometer System User Handbook, , Renishaw picMiguel, P.A.C., Saunders, P.L., King, T.G., Improving CMM accuracy by software error compensation (1996) Proceedings of the Third International Symposium on Measurement Technology and Intelligent Instruments, , Hayama, Japan, pp153-160, OctoberPeggs, G.H., Developing standards for CMMs (1989) Quality Today, pp. S1-S4Miguel, P.A.C., King, T.G., Davis, E.J., CMM verification looms large (1997) Quality Today, pp. 58-510. , JanuaryPeggs, G.H., Traceability for coordinate measurement technology (1990) Proceedings of the 28th International MATADOR Conference, pp. 463-468. , ManchesterPeggs, G.H., A review of the methods for the accurate metrology of complex three-dimensional components and artefacts (1991) NPL Report, , MOM 10Miguel, P.A.C., King, T.G., Concept, classification, and comparison of performance tests in coordinate measuring machines (1995) International Journal of Quality and Reliability Management, 12 (8), pp. 50-65Kunzmann, H., Trapet, E., Watdele, F., A uniform concept for calibration, acceptance test, and periodic inspection of CMM using reference objects (1990) Annals of the CIRP, 39 (1), pp. 561-564Weckenmann, A., Heinrichowski, M., Problems with software for running coordinates measuring machines (1985) Precision Engineering, 7 (2), pp. 87-91. , AprilKunzmann, H., Waldele, F., Performance of CMM (1988) Annals of the CIRP, 37 (2), pp. 633-640Waldele, F., Drieschner, R., Elligsen, R., (1991) Testing of Coordinate Measuring Machine Algorithms, Phase 2, , BCR-lnformation EUR 13 417 EN, Brussels/LuxemburgHocken, R., Raja, J., Babu, U., Sampling issues in coordinate metrology (1993) Manufacturing Review, 6 (4). , Decembe