We have studied in room air the positive corona glow (Hermstein's glow [1]) along a stainless steel rod, 2 mm in diameter, equidistant from two parallel brass plates. The distance of the plates was 9 cm
Abstract: A glow discharge has been experimentally investigated in air at atmospheric pressure using...
The object of our study is the induced formation of streamers (thin current filaments with radius of...
ABSTRACT. This paper describes an optoelectronic system for detecting corona discharge in SF6 filled...
Faint corona glow around a high voltage cable at 17 kV. The electrodes below the cable are made of s...
The paper treats experiments, computer simulations, and the physical explanation of the oscillatory ...
A set of oscillograms has been obtained to investigate the development of pulse mode in the positive...
Corona glow in a high-voltage cable at 17 kV and in a typical connector tip at the end of the cable....
International audienceThe corona discharge obtained in atmospheric air between a wire and two plates...
An investigation of a pulsed positive corona discharge propagating in very narrow volumes is present...
The paper presents results of comparative analyses of optical signals generated by corona discharges...
This communication is devoted to an experimental electrical analysis of a DC surface corona discharg...
The discharge space between a positive cylindrical electrode (in the diameter range 0.3185-3.175cm)...
The glow- and streamer-corona discharge forms occurring in air at the positive central conductor of ...
Measurements were made of current growth waveforms corresponding to the glow-to-arc transition in a ...
The technique of dimensional analysis is applied to a general corona discharge between two electrode...
Abstract: A glow discharge has been experimentally investigated in air at atmospheric pressure using...
The object of our study is the induced formation of streamers (thin current filaments with radius of...
ABSTRACT. This paper describes an optoelectronic system for detecting corona discharge in SF6 filled...
Faint corona glow around a high voltage cable at 17 kV. The electrodes below the cable are made of s...
The paper treats experiments, computer simulations, and the physical explanation of the oscillatory ...
A set of oscillograms has been obtained to investigate the development of pulse mode in the positive...
Corona glow in a high-voltage cable at 17 kV and in a typical connector tip at the end of the cable....
International audienceThe corona discharge obtained in atmospheric air between a wire and two plates...
An investigation of a pulsed positive corona discharge propagating in very narrow volumes is present...
The paper presents results of comparative analyses of optical signals generated by corona discharges...
This communication is devoted to an experimental electrical analysis of a DC surface corona discharg...
The discharge space between a positive cylindrical electrode (in the diameter range 0.3185-3.175cm)...
The glow- and streamer-corona discharge forms occurring in air at the positive central conductor of ...
Measurements were made of current growth waveforms corresponding to the glow-to-arc transition in a ...
The technique of dimensional analysis is applied to a general corona discharge between two electrode...
Abstract: A glow discharge has been experimentally investigated in air at atmospheric pressure using...
The object of our study is the induced formation of streamers (thin current filaments with radius of...
ABSTRACT. This paper describes an optoelectronic system for detecting corona discharge in SF6 filled...
DOI
Add to ORKG