Zirconium(IV) oxide coated on a silica gel surface was found to be very effective for extracting CrVI from aqueous solutions at a pH of about 3. A microcolumn packed with this material was inserted into a flow injection system for the separation and preconcentration of CrVI. By this process, a concentration level of 2 ppb was detected with a relative standard deviation of 2.4%. Because of the high selectivity of the immobilized substrate, it was possible to determine CrVI in the presence of larger amounts of other ions. The analysis was also carried out on natural water spiked with CrVI, and compared with a standard method.11761029103
An on-line procedure for the oxidation of Cr(III) to Cr(VI) was developed. The extent of oxidation w...
International audienceFew attempts have been made to sample labile chromium with the DGT passive sam...
Speciation and separation of chromium (VI) and chromium (III) from aqueous solutions were investigat...
Determination of Cr(VI) using the composite cellulose-zirconium(IV) oxide with 5% w/w of zirconium w...
Toxicological studies have shown that the degree of toxicity of some elements depends on the chemica...
A flow injection (FI) technique based on an on-line solid phase extraction (SPE) coupled with flame ...
A lab-made hybrid mesoporous solid was employed in a flow injection solid phase extraction electroth...
A flow-based method for the spectrophotometric determination of chromium (VI) in recreational waters...
A new method for the speciation, preconcentration, and separation of Cr(III) and Cr(VI) species in d...
An on-line technique for the determination of chromium species with atomic absorption spectrometry i...
Chromium(III) at the ng L-1 level was extracted using partially silylated MCM-41 modified by a tetra...
Chromium may exist in environmental waters as Cr(III) and Cr(IV), the latter being the toxic and car...
The recovery of the Cr(VI) ions was not affected by anions and cations widely found in environmental...
A linear copolymer was prepared from 4-vinylpyridine and styrene. An ion-imprinted polymer (IIP) spe...
Thesis (Master)--İzmir Institute of Technology, Chemistry, İzmir, 2007Includes bibliographical refer...
An on-line procedure for the oxidation of Cr(III) to Cr(VI) was developed. The extent of oxidation w...
International audienceFew attempts have been made to sample labile chromium with the DGT passive sam...
Speciation and separation of chromium (VI) and chromium (III) from aqueous solutions were investigat...
Determination of Cr(VI) using the composite cellulose-zirconium(IV) oxide with 5% w/w of zirconium w...
Toxicological studies have shown that the degree of toxicity of some elements depends on the chemica...
A flow injection (FI) technique based on an on-line solid phase extraction (SPE) coupled with flame ...
A lab-made hybrid mesoporous solid was employed in a flow injection solid phase extraction electroth...
A flow-based method for the spectrophotometric determination of chromium (VI) in recreational waters...
A new method for the speciation, preconcentration, and separation of Cr(III) and Cr(VI) species in d...
An on-line technique for the determination of chromium species with atomic absorption spectrometry i...
Chromium(III) at the ng L-1 level was extracted using partially silylated MCM-41 modified by a tetra...
Chromium may exist in environmental waters as Cr(III) and Cr(IV), the latter being the toxic and car...
The recovery of the Cr(VI) ions was not affected by anions and cations widely found in environmental...
A linear copolymer was prepared from 4-vinylpyridine and styrene. An ion-imprinted polymer (IIP) spe...
Thesis (Master)--İzmir Institute of Technology, Chemistry, İzmir, 2007Includes bibliographical refer...
An on-line procedure for the oxidation of Cr(III) to Cr(VI) was developed. The extent of oxidation w...
International audienceFew attempts have been made to sample labile chromium with the DGT passive sam...
Speciation and separation of chromium (VI) and chromium (III) from aqueous solutions were investigat...