Add to ORKGThis paper describes some problems encountered while converting the analog methodology for flicker measurements, internationally recommended, into a digital processing device. The main points considered are: filter conversion method, A/D precision compromises, minimization of sampling frequency, real-time calculation procedures and interfacing with IBM-PC microcomputers through a standard Centronics parallel port.275776
The paper describes the test of flickerevaluation made by eleven different types of power qualityana...
Noise of electronic devices can be measured by comparison using a noise source at input and an outpu...
Flicker severity is a parameter defined in the Standard EN 50160 that involves both power quality an...
Flickermeter is a common name for a system that measures the obnoxiousness of flicker caused by volt...
This paper presents an implementation of a test system for advanced calibration and performance anal...
[[abstract]]Voltage fluctuations caused by rapidly changing loads in the power systems may give rise...
Over last few decades, there has been deterioration in the power quality due to the increase in non...
W artykule przedstawiono problematykę wzorcowania urządzeń umożliwiających pomiar wskaźnika krótkook...
Measurement of light flicker according to current standard EN ISO 61000-4-15 is performed through me...
Measurement of light flicker according to current standard EN ISO 61000-4-15 is performed through me...
O fenômeno de cintilação luminosa se caracteriza por variações de luminosidade na faixa de freqüênci...
This paper proposes a method to estimate the flicker severity index using the Hadamard transform. A ...
none4The international standard EN 61000-4-15 gives functional and design specifications for the Fli...
This paper describes a new and highly efficient measurement method (algorithm) that determines how f...
The international standard EN 61000-4-15 gives functional and design specifications for the Flickerm...
The paper describes the test of flickerevaluation made by eleven different types of power qualityana...
Noise of electronic devices can be measured by comparison using a noise source at input and an outpu...
Flicker severity is a parameter defined in the Standard EN 50160 that involves both power quality an...
Flickermeter is a common name for a system that measures the obnoxiousness of flicker caused by volt...
This paper presents an implementation of a test system for advanced calibration and performance anal...
[[abstract]]Voltage fluctuations caused by rapidly changing loads in the power systems may give rise...
Over last few decades, there has been deterioration in the power quality due to the increase in non...
W artykule przedstawiono problematykę wzorcowania urządzeń umożliwiających pomiar wskaźnika krótkook...
Measurement of light flicker according to current standard EN ISO 61000-4-15 is performed through me...
Measurement of light flicker according to current standard EN ISO 61000-4-15 is performed through me...
O fenômeno de cintilação luminosa se caracteriza por variações de luminosidade na faixa de freqüênci...
This paper proposes a method to estimate the flicker severity index using the Hadamard transform. A ...
none4The international standard EN 61000-4-15 gives functional and design specifications for the Fli...
This paper describes a new and highly efficient measurement method (algorithm) that determines how f...
The international standard EN 61000-4-15 gives functional and design specifications for the Flickerm...
The paper describes the test of flickerevaluation made by eleven different types of power qualityana...
Noise of electronic devices can be measured by comparison using a noise source at input and an outpu...
Flicker severity is a parameter defined in the Standard EN 50160 that involves both power quality an...
