SISTEM KENDALI OTOMATIS KOMPOR PADA PEREBUSAN AIR STOVE ON AUTOMATIC CONTROL SYSTEM WATER BOILING

Has created an automatic control system on the stove boiling water which is designed to facilitate the performance of someone using the stove in boiling water that will automatically display the temperature of boiling water on the LCD. This system consists of type k thermocouple temperatur sensor with signal conditioner ad595aq, a series of push-button switch to turn off the stove manually, a series of relays to disconnect and connect the vcc wires on the servo motor is equipped with Motorola C261 Mobile Server to notify via sms when after the water has been cooked, and the system microcontroller. The process of boiling and the water level will be displayed on the LCD. The design of the automatic control system using the stove in boiling water sensor in the type k thermocouple signal conditioning ad595aq, a series of pushbutton switch to turn off the stove manually, a series of relays to disconnect and connect the vcc wires on the servo motor will turn on and turn off the stove. Automatic control system on the stove boiling water can be implemented using the Arduino Uno. Type k thermocouple sensor with signal conditioner ad595aq inserted in the boiled water to measure temperature. Water temperature is displayed on the LCD. The data from the temperature sensor go into PORT A0 Arduino Uno. To control the stove is controlled by a servo motor connected to a relay circuit that will connect and disconnect the vcc wires on servo motor. The automatic burner control device can work when temperature is <100�C stove will automatically ignite the fire and when the temperature >100�C will turn off the stove fire automatically