Photo-microfluidic chip reactors for propene complete oxidation with TiO2 photocalyst using UV-LED light

In this study, we present a photo-microreactor illuminated with a low power LED light as a highly efficient system to achieve the total oxidation of propene using a TiO2 photocatalyst. This abatement system (photo-microreactor) consists in an immobilized benchmark photocatalyst (TiO2, P25) inside a commercial glass microchannel chip (UV transparent microfluidic chips, internal volume of 9.5 μl) using a packed-bed configuration without any previous treatment. The P25 inside the microreactor shows a nearly homogenous filling of the particles resulting in a low pressure drop throughout the system. In terms of propene abatement (Catalytic activity), the P25 inside the commercial microreactor reaches total propene conversion (100%) under flow conditions at low concentrations (100 ppmv) due to shorter diffusion distances, large surface-to-volume ratios, efficient heat transfer, and the improved light penetration inside the microchannel. Moreover, the prepared microreactor uses a low consumption power (LED), low residence time and presents a relatively low pressure drop making this device (P25 inside a commercial microreactor) very interesting for the abatement of volatile organic compounds at low concentration for example at indoor ambient due to its small size (45 × 15 mm).The acknowledgements come at the end of an article after the conclusions and before the notes and references. The authors thank MINECO (Project CTQ2015-66080-R, MINECO/FEDER) and the Generalitat Valenciana (PROMETEOII/2018/076) for financial support. JFC thanks MINECO for a researcher formation grant (BES-2016-078079)