Interfaces between cement and clay are common in engineered barrier systems for the underground disposal of radioactive waste. The geochemical contrast between clay and cement leads to alterations of both materials following dissolution and precipitation reactions. Porosity is a key parameter for, and a key outcome of, such reactive transport. Here we report on the evolution of porosity within small samples made from ordinary portland cement and Na montmorillonite. Water contents, a proxy for porosity in saturated samples, were derived from neutron imaging. Specific calibration procedures were developed to account for multiple scattering effects. An increase in cement porosity was observed propagating similar to 2 mm away from the interface...
The design of engineered barrier systems for high-level radioactive waste isolation requires the use...
International audienceDisposal in geological clay formations is one of the solutions envisaged for m...
International audienceHighly alkaline environments induced by cement-based materials are likely to c...
In many designs for radioactive waste repositories, cement and clay will come into direct contact. T...
In many designs for radioactive waste repositories, cement and clay will come into direct contact. T...
International audienceThe solution selected by some countries to isolate radioactive wastes from the...
Interactions between concrete and clays are driven by the strong chemical gradients in pore water an...
The geological storage of nuclear waste includes multibarrier engineered systems where a large amoun...
Strong chemical gradients between clay and concrete porewater lead to diffusive transport across the...
Deep geological storage of radioactive waste foresees cementitious materials as reinforcement of tun...
Deep geological storage of radioactive waste foresees cementitious materials as reinforcement of tun...
In this preliminary study we use neutron radiography and tomography to examine differences in water ...
International audienceLarge amounts of nuclear waste await final disposal worldwide. A combination o...
The design of engineered barrier systems for high-level radioactive waste isolation requires the use...
International audienceDisposal in geological clay formations is one of the solutions envisaged for m...
International audienceHighly alkaline environments induced by cement-based materials are likely to c...
In many designs for radioactive waste repositories, cement and clay will come into direct contact. T...
In many designs for radioactive waste repositories, cement and clay will come into direct contact. T...
International audienceThe solution selected by some countries to isolate radioactive wastes from the...
Interactions between concrete and clays are driven by the strong chemical gradients in pore water an...
The geological storage of nuclear waste includes multibarrier engineered systems where a large amoun...
Strong chemical gradients between clay and concrete porewater lead to diffusive transport across the...
Deep geological storage of radioactive waste foresees cementitious materials as reinforcement of tun...
Deep geological storage of radioactive waste foresees cementitious materials as reinforcement of tun...
In this preliminary study we use neutron radiography and tomography to examine differences in water ...
International audienceLarge amounts of nuclear waste await final disposal worldwide. A combination o...
The design of engineered barrier systems for high-level radioactive waste isolation requires the use...
International audienceDisposal in geological clay formations is one of the solutions envisaged for m...
International audienceHighly alkaline environments induced by cement-based materials are likely to c...