Add to ORKGThis paper describes the bio-oil production process of a mixture of agricultural wastes: discarded soybean frying oil, coffee and sawdust, by pyrolysis and thermal cracking in the presence of hydrogen. The fractions obtained in the pyrolysis and/or cracking processes were divided into a light fraction and a heavy one. All the fractions were analyzed by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detection (GC×GC/TOFMS). The characteristics of the fractions obtained in the cracking process in the presence of hydrogen were similar to those of petroleum-based naphtha, while the fractions obtained by pyrolysis contained significant quantities of compounds such as furanmethanol, hexanol, and benzofuran,...
This work investigates the effect of production scales (laboratory, bench, and pilot) by pyrolysis o...
Pyrolysis of glycerol has been identified as a possible route for producing high added value fuels l...
Owing to instabilities, very little has been accomplished with regard to simple cost-effective separ...
This paper describes the bio-oil production process of a mixture of agricultural wastes: discarded s...
In this paper, we have done some important analysis of bio-oil obtained from the pyrolysis of coffee...
Pyrolysis is a thermal process for converting various biomasses, wastes and residues to produce high...
This study used thermal cracking with hydrogen (HTC) to produce bio-fuel oil (BFO) from jatropha oil...
Bio-oils from different residual biomass raw materials (pine wood, mesquite wood and wheat shell) we...
International audienceThis paper is devoted to the study of valorization of tar from biomass gasific...
Molecular distillation was used to separate bio-oil into a light fraction, a middle fraction and a h...
The Bio-oil was produced from the pyrolysis of agricultural wastes (Eucalyptus sawdust) and discarde...
In this paper, biomass in goat manure form is pyrolyzed by a fixed-bed reactor. The influence of the...
In our previous work, steam-exploded wheat straw has been used to produce microbial oil by solid-sta...
Pyrolysis oils are the cheapest liquid fuel derived from lignocellulosic biomass. However, pyrolysis...
In the current study, plain and lignin loaded with Zeolite Y, hydrogen was decomposed in a pyrolysis...
This work investigates the effect of production scales (laboratory, bench, and pilot) by pyrolysis o...
Pyrolysis of glycerol has been identified as a possible route for producing high added value fuels l...
Owing to instabilities, very little has been accomplished with regard to simple cost-effective separ...
This paper describes the bio-oil production process of a mixture of agricultural wastes: discarded s...
In this paper, we have done some important analysis of bio-oil obtained from the pyrolysis of coffee...
Pyrolysis is a thermal process for converting various biomasses, wastes and residues to produce high...
This study used thermal cracking with hydrogen (HTC) to produce bio-fuel oil (BFO) from jatropha oil...
Bio-oils from different residual biomass raw materials (pine wood, mesquite wood and wheat shell) we...
International audienceThis paper is devoted to the study of valorization of tar from biomass gasific...
Molecular distillation was used to separate bio-oil into a light fraction, a middle fraction and a h...
The Bio-oil was produced from the pyrolysis of agricultural wastes (Eucalyptus sawdust) and discarde...
In this paper, biomass in goat manure form is pyrolyzed by a fixed-bed reactor. The influence of the...
In our previous work, steam-exploded wheat straw has been used to produce microbial oil by solid-sta...
Pyrolysis oils are the cheapest liquid fuel derived from lignocellulosic biomass. However, pyrolysis...
In the current study, plain and lignin loaded with Zeolite Y, hydrogen was decomposed in a pyrolysis...
This work investigates the effect of production scales (laboratory, bench, and pilot) by pyrolysis o...
Pyrolysis of glycerol has been identified as a possible route for producing high added value fuels l...
Owing to instabilities, very little has been accomplished with regard to simple cost-effective separ...