Wind Turbine Wake Effect Visualization and LiDAR Measurement Techniques

The expansion of wind energy development has resulted in larger wind farms and closer placement of turbines to utilize the space available. Each turbine produces a wake that affects downstream turbines, which causes issues such as production loss, blade loading, and fluctuating electrical output. To minimize this impact, the wake produced by turbines must first be understood. Experimental methods were used in the exploration of the wake effects of wind turbines. Smoke visualization inside the University of Waterloo Wind Generation Facility was used to determine the helical vortex wake distribution behind a 3.3 m diameter turbine as well as the tip vortex shedding from the blade. Wind Doppler Light Detection and Ranging (LiDAR) measurement devices were modified and used to measure wind turbine wake velocities. The University of Waterloo Wind Energy Group has a ZephIR z150 LiDAR to use in this study. The LiDAR was verified under normal operation for accuracy against a cup and vane anemometer. The LiDAR was then verified for accuracy and to determine the position of measurements after modifications necessary for future wake measurement experiments.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author