The analysis and design of a Single-ended Simultaneous Bidirectional Transceiver for ultra-short reach die-to-die digital links is presented in this thesis. A novel passive hy- brid circuit is presented which allows for the rejection of near-end transmit data while simultaneously receiving far-end transmit data. A transceiver was fabricated in a 28nm CMOS SOI technology as a proof of concept. A custom organic substrate BGA pack- age was designed to house two transceiver dies and a 5mm stripline between them. An aggregate datarate of 40Gb/s (20Gb/s in each direction) was achieved between the two dies, at a power eciency of 0.8pJ/bit, in RC-extracted simulation.M.A.S
A bidirectional serial link on-chip implementation is going to be assessed so as to set the option o...
In this paper we propose to eliminate all data and control pads generally present in conventional ch...
A 10-Gb/s serial link transceiver is demonstrated using double-edged pulsewidth modulation (DPWM) to...
The analysis and design of a Single-ended Simultaneous Bidirectional Transceiver for ultra-short rea...
The demand for higher aggregate bandwidth at all levels of communication infrastructure has been dri...
A simultaneous bidirectional transceiver over a single wire has been developed in a 65 nm CMOS techn...
In this paper, a new bi-directional transceiver has been proposed for high speed signaling. The new ...
link has been designed and integrated in a O.8-pm CMOS process. An experimental receiving front-end ...
This paper presents a low-energy die-to-die inductive transceiver for use within a stacked 3D-IC. Th...
The performance of many digital systems today is limited by the interconnection bandwidth between ch...
In this paper we report on the fabrication, implementation and experimental characterization of an i...
DoctorTwo transceiver circuits are proposed for low-energy and low-EMI single-ended memory interface...
Abstract—A transceiver capable of 6.25-Gb/s data transmission across legacy communications equipment...
In this paper we report on the fabrication, implementation and experimental characterization of an i...
AbstractThe transmission of data from detectors in future high energy experiments will be driven by ...
A bidirectional serial link on-chip implementation is going to be assessed so as to set the option o...
In this paper we propose to eliminate all data and control pads generally present in conventional ch...
A 10-Gb/s serial link transceiver is demonstrated using double-edged pulsewidth modulation (DPWM) to...
The analysis and design of a Single-ended Simultaneous Bidirectional Transceiver for ultra-short rea...
The demand for higher aggregate bandwidth at all levels of communication infrastructure has been dri...
A simultaneous bidirectional transceiver over a single wire has been developed in a 65 nm CMOS techn...
In this paper, a new bi-directional transceiver has been proposed for high speed signaling. The new ...
link has been designed and integrated in a O.8-pm CMOS process. An experimental receiving front-end ...
This paper presents a low-energy die-to-die inductive transceiver for use within a stacked 3D-IC. Th...
The performance of many digital systems today is limited by the interconnection bandwidth between ch...
In this paper we report on the fabrication, implementation and experimental characterization of an i...
DoctorTwo transceiver circuits are proposed for low-energy and low-EMI single-ended memory interface...
Abstract—A transceiver capable of 6.25-Gb/s data transmission across legacy communications equipment...
In this paper we report on the fabrication, implementation and experimental characterization of an i...
AbstractThe transmission of data from detectors in future high energy experiments will be driven by ...
A bidirectional serial link on-chip implementation is going to be assessed so as to set the option o...
In this paper we propose to eliminate all data and control pads generally present in conventional ch...
A 10-Gb/s serial link transceiver is demonstrated using double-edged pulsewidth modulation (DPWM) to...