Seismic Design and Response of Steel Multi-Tiered Concentrically Braced Frames in Canada

This article investigates the seismic design and response of steel multi-tiered concentrically braced frames (MT-BFs) in which braces meet at columns between diaphragms. The seismic design provisions of CSA S16-14 are described and illustrated for 3-tiered Type MD (moderately ductile) and 5-tiered Type LD (limited ductile) braced frames. Analysis methods are proposed to evaluate the in-plane flexural demand on columns. The seismic response of the frames is examined through nonlinear response history analysis. As assumed in design, inelastic deformations tend to concentrate in one tier over the frame height, causing non-uniform drift demands and in-plane bending moments in the columns. CSA S16 provisions predicted well the frame in-plane flexural response and result in acceptable ductility demands on the braces. An extended seismic analysis and design approach that accounts for vertical distribution of brace tension yielding along the frame height is proposed for frames that exceed the limits prescribed in CSA S16.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author