In order to compare the humidity standards at the Centre Technique des Industries Aérauliques et Thermiques (France) and the Centre for Metrology and Accreditation (Finland), a dew-point hygrometer was calibrated at both laboratories within a EUROMET project. There were eight measurement points in the range -40 °C to + 60 °C. The difference between the standards was determined and its uncertainty was evaluated. The difference was between -0.03°C and + 0.09°C with the average being 0.01°C. The uncertainty of the difference was ±0.08°C to ±0.17°C (k = 2). The measurements and the analysis of the results are reported in this paper.</p
Psychrometers remain the most widely used instruments for controlling the humidity in climatic test ...
The first European humidity key comparison EURAMET-T.K6 was completed in 2008, and it covered the de...
The request of calibration of humidity sensors at high temperature and high relative humidity is qui...
In order to compare the humidity standards at the Centre Technique des Industries Aérauliques et The...
Generator systems realizing a dew-point temperature scale were compared using a chilled-mirror hygro...
In order to assure the quality of dew-point measurements, a bilateral comparison between the Nationa...
Three European National Metrology Institutes (NMIs), VSL, LNE-CETIAT and INRiM, extended their relat...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
A bilateral comparison between UME and IMGC was carried out in the field of humidity from 30C to 60...
This article describes a bilateral comparison of the relative humidity measurement standards of the ...
A two-temperature humidity generator has been developed at the Centre for Metrology and Accreditatio...
As the European extension of the first CCT humidity key comparison, EUROMET.T-K6 was successfully co...
European national metrology institutes use calibration systems of various types for calibrating ther...
European national metrology institutes use calibration systems of various types for calibrating the...
Psychrometers remain the most widely used instruments for controlling the humidity in climatic test ...
The first European humidity key comparison EURAMET-T.K6 was completed in 2008, and it covered the de...
The request of calibration of humidity sensors at high temperature and high relative humidity is qui...
In order to compare the humidity standards at the Centre Technique des Industries Aérauliques et The...
Generator systems realizing a dew-point temperature scale were compared using a chilled-mirror hygro...
In order to assure the quality of dew-point measurements, a bilateral comparison between the Nationa...
Three European National Metrology Institutes (NMIs), VSL, LNE-CETIAT and INRiM, extended their relat...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
A bilateral comparison between UME and IMGC was carried out in the field of humidity from 30C to 60...
This article describes a bilateral comparison of the relative humidity measurement standards of the ...
A two-temperature humidity generator has been developed at the Centre for Metrology and Accreditatio...
As the European extension of the first CCT humidity key comparison, EUROMET.T-K6 was successfully co...
European national metrology institutes use calibration systems of various types for calibrating ther...
European national metrology institutes use calibration systems of various types for calibrating the...
Psychrometers remain the most widely used instruments for controlling the humidity in climatic test ...
The first European humidity key comparison EURAMET-T.K6 was completed in 2008, and it covered the de...
The request of calibration of humidity sensors at high temperature and high relative humidity is qui...