Add to ORKGThe systematic design and optimization of performance of coated surfaces suffers from lack of suitable procedures to carry out such an analysis. A tribological contact with two loaded surfaces in relative motion is a complex system requiring a general three-dimensional finite deformation and finite sliding contact analysis in order to succeed. Such analyses were carried out for a 2 m TiN coating on a tool steel substrate. The analyses were performed to simulate the whole scratch test and the results subjected to a fracture mechanical analysis. A methodology and a model for attaining fracture toughness directly using the cracking patterns of a scratch test and finite element analysis results is presented. The fracture mechanical model is ver...
The stress and fracture conditions of a coated surface, that are the origin to wear, were analysed b...
The interface adhesion strength (or interface toughness) of a thin film/substrate system is often as...
Thin hard coatings on components and tools are used increasingly due to the rapid development in dep...
The systematic design and optimization of performance of coated surfaces suffers from lack of suitab...
The contact condition with a sphere sliding over a plate coated with a very thin coating is analysed...
The contact condition with a sphere sliding over a plate coated with a very thin coating is analysed...
The contact situation in a scratch tester, when a spherical rigid diamond tip is sliding with an inc...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings offer high wear...
A tribological analysis of deformations and stresses generated and their influence on crack generati...
The surface fracture mechanisms, that are the origin to wear, were analysed by three-dimensional fin...
A general approach to controlling and modelling friction and wear in sliding contacts with coated su...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings offer high wear...
The fundamentals of coating tribology is presented in a generalised holistic approach to friction an...
The assessment of adhesion property of thin films by scratch test method is still a big challenge, r...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings, offer high wea...
The stress and fracture conditions of a coated surface, that are the origin to wear, were analysed b...
The interface adhesion strength (or interface toughness) of a thin film/substrate system is often as...
Thin hard coatings on components and tools are used increasingly due to the rapid development in dep...
The systematic design and optimization of performance of coated surfaces suffers from lack of suitab...
The contact condition with a sphere sliding over a plate coated with a very thin coating is analysed...
The contact condition with a sphere sliding over a plate coated with a very thin coating is analysed...
The contact situation in a scratch tester, when a spherical rigid diamond tip is sliding with an inc...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings offer high wear...
A tribological analysis of deformations and stresses generated and their influence on crack generati...
The surface fracture mechanisms, that are the origin to wear, were analysed by three-dimensional fin...
A general approach to controlling and modelling friction and wear in sliding contacts with coated su...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings offer high wear...
The fundamentals of coating tribology is presented in a generalised holistic approach to friction an...
The assessment of adhesion property of thin films by scratch test method is still a big challenge, r...
Surface coatings, like titanium nitride (TiN) and diamond-like carbon (DLC) coatings, offer high wea...
The stress and fracture conditions of a coated surface, that are the origin to wear, were analysed b...
The interface adhesion strength (or interface toughness) of a thin film/substrate system is often as...
Thin hard coatings on components and tools are used increasingly due to the rapid development in dep...