The pressure balance used for MIKES barometer calibrations is a DH Instruments PG7601 for the range 5 kPa–350 kPa. The commonly used pressure range in barometer calibrations 850 hPa–1050 hPa has been automated by a removable weight exchange system. The new weight exchanger system has been tested in routine calibrations. The construction of the weight exchanger system for the pressure balance is described and the measurement results are shown
An intercomparison in the gauge pressure range from -95 kPa to +100 kPa was arranged in 2005 in Finl...
An intercomparison P14 in the gauge pressure range 0 … 60 MPa was arranged in 2003 by the Centre for...
The pressure laboratory of Metrosert, the leading pressure laboratory in Estonia, replaced almost al...
The pressure balance used for MIKES barometer calibrations is a DH Instruments PG7601 for the range ...
In this study, a digital manometer was used as a transfer standard to perform calibration of a pneum...
The pressure laboratories of the Centre for Metrology and Accreditation (MIKES) and Vaisala Oyj comp...
The pressure laboratories of Centre for Metrology and Accreditation (MIKES), Vaisala Oyj and Laborat...
Centre for Metrology and Accreditation (MIKES) and the Measurement Standards Laboratory of Vaisala O...
A comparison P15 in the absolute pressure range 0,02 hPa … 10 hPa was arranged in 2003 between the C...
This paper describes the results of the interlaboratory comparison for pressure measurements of 9 la...
A new absolute pressure measurement system based on the simultaneous measurement of length and ultra...
Mass measurement of more than 500 kg on an electronic mass comparator has no better repeatability an...
In performing the calibration of the sphygmomanometer, the officer needs to first reset the installa...
of absolute pressure standards in the barometric range from 80 kPa to 110 kPa EUROMET Project N ° 88
Fifty-channel automatic pressure transducer calibration system increases quantity and accuracy for t...
An intercomparison in the gauge pressure range from -95 kPa to +100 kPa was arranged in 2005 in Finl...
An intercomparison P14 in the gauge pressure range 0 … 60 MPa was arranged in 2003 by the Centre for...
The pressure laboratory of Metrosert, the leading pressure laboratory in Estonia, replaced almost al...
The pressure balance used for MIKES barometer calibrations is a DH Instruments PG7601 for the range ...
In this study, a digital manometer was used as a transfer standard to perform calibration of a pneum...
The pressure laboratories of the Centre for Metrology and Accreditation (MIKES) and Vaisala Oyj comp...
The pressure laboratories of Centre for Metrology and Accreditation (MIKES), Vaisala Oyj and Laborat...
Centre for Metrology and Accreditation (MIKES) and the Measurement Standards Laboratory of Vaisala O...
A comparison P15 in the absolute pressure range 0,02 hPa … 10 hPa was arranged in 2003 between the C...
This paper describes the results of the interlaboratory comparison for pressure measurements of 9 la...
A new absolute pressure measurement system based on the simultaneous measurement of length and ultra...
Mass measurement of more than 500 kg on an electronic mass comparator has no better repeatability an...
In performing the calibration of the sphygmomanometer, the officer needs to first reset the installa...
of absolute pressure standards in the barometric range from 80 kPa to 110 kPa EUROMET Project N ° 88
Fifty-channel automatic pressure transducer calibration system increases quantity and accuracy for t...
An intercomparison in the gauge pressure range from -95 kPa to +100 kPa was arranged in 2005 in Finl...
An intercomparison P14 in the gauge pressure range 0 … 60 MPa was arranged in 2003 by the Centre for...
The pressure laboratory of Metrosert, the leading pressure laboratory in Estonia, replaced almost al...