Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to monitor the thin‐film reactions and nitrogen redistribution in the 〈Si〉/Ti/W–N/Al metallization system. It is found that nitrogen in the W–N layer redistributes into Ti after annealing at temperatures above 500 °C. As a consequence of this redistribution of nitrogen, a significant amount of interdiffusion between Al and the underlayers is observed after annealing at 550 °C. This result contrasts markedly with that for the 〈Si〉/W–N/Al system, where no interdiffusion can be detected after the same thermal treatment. We attribute this redistribution of nitrogen to the stronger affinity of Ti for nitrogen than W. If the Ti layer is replaced by a sp...
The interactions occurring in a Ti–Si bilayer have been investigated by in situ resistance measureme...
Samples consisting of bilayers of Ni or Pd on Al or Ti were produced. The top Ni or Pd layers were i...
Aspects on the phase stability and mechanical properties of nitrogen deficient (Ti0.54Al0.46)N-y all...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
The annealing processes of Ti/SiO2/Si system at different temperatures in nitrogen with a trace of o...
[[abstract]]High resolution TEM becomes more powerful when coupled with a Gatan imaging filler (GIF)...
The reliability of the A1/TiW/TiSiJSi structure is studied as a function of sintering temperature an...
The behavior of Ti–Mo–Au metallization on Al2O3 and C has been investigated by backscattering spectr...
The effect of post-deposition rapid thermal annealing in vacuum and in dry O2 on the stability of re...
Reactions of Ti/Al couples induced by furnace annealing were investigated (at elevated temperature) ...
W-Si-N thin films were deposited via rf-magnetron sputtering from a W5Si3 target in Ar/N-2 reactive ...
Ti–Si–Al–N films were prepared by rf reactive magnetron sputtering, in static and rotation modes, us...
When used at high temperature in air, titanium-based alloys form an oxide scale at their surface but...
The interactions occurring in a Ti–Si bilayer have been investigated by in situ resistance measureme...
Samples consisting of bilayers of Ni or Pd on Al or Ti were produced. The top Ni or Pd layers were i...
Aspects on the phase stability and mechanical properties of nitrogen deficient (Ti0.54Al0.46)N-y all...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
Backscattering spectrometry, Auger electron spectroscopy, and x‐ray diffraction have been used to mo...
The annealing processes of Ti/SiO2/Si system at different temperatures in nitrogen with a trace of o...
[[abstract]]High resolution TEM becomes more powerful when coupled with a Gatan imaging filler (GIF)...
The reliability of the A1/TiW/TiSiJSi structure is studied as a function of sintering temperature an...
The behavior of Ti–Mo–Au metallization on Al2O3 and C has been investigated by backscattering spectr...
The effect of post-deposition rapid thermal annealing in vacuum and in dry O2 on the stability of re...
Reactions of Ti/Al couples induced by furnace annealing were investigated (at elevated temperature) ...
W-Si-N thin films were deposited via rf-magnetron sputtering from a W5Si3 target in Ar/N-2 reactive ...
Ti–Si–Al–N films were prepared by rf reactive magnetron sputtering, in static and rotation modes, us...
When used at high temperature in air, titanium-based alloys form an oxide scale at their surface but...
The interactions occurring in a Ti–Si bilayer have been investigated by in situ resistance measureme...
Samples consisting of bilayers of Ni or Pd on Al or Ti were produced. The top Ni or Pd layers were i...
Aspects on the phase stability and mechanical properties of nitrogen deficient (Ti0.54Al0.46)N-y all...