Magnesium-walled argon gas flow ionization chamber (Mg(Ar)) is used for photon dose measurements in the epithermal neutron beam of FiR 1 reactor in Finland. In this study, the photon dose measurements were re-evaluated against calculations applying a new chamber calibration factor defined in water instead of in air. Also, effect of the build-up cap on the measurements was investigated. The new calibration factor provides improved agreement between measured and calculated photon dose. Use of the build-up cap does not affect the measured signal in water in neutron beam
Purpose: In Japan, calibration of therapy-level dosimeter with absorbed dose to water have been perf...
New methods are required for a better interpretation of the response of ionisation chambers in order...
The dual ionisation chamber technique is the recommended method for mixed field dosimetry of epither...
Magnesium-walled argon gas flow ionization chamber (Mg(Ar)) is used for photon dose measurements in ...
Photon quality correction factors (kQy) for ionization chamber photon dosimetry in an epithermal neu...
The mixed neutron-photon beam of FiR 1 reactor is used for boron-neutron capture therapy (BNCT) in F...
The absorbed dose-to-water calibration coefficients ND,W of some ionization chambers were determine...
Absorbed dose to water calibrations of NE Technology Type 2561 chambers are carried out at the Natio...
The validity of the twin ionisation chamber technique for determination of gamma and neutron doses i...
With the development of the water calorimeter direct measurement of absorbed dose in water becomes p...
High energy photon (over 10 MeV) and neutron beams adopted in radiobiology and radiotherapy always p...
For an accurate determination of the absorbed doses in complex radiation fields (e.g. mixed neutron-...
An epithermal neutron beam from the High Flux Reactor is used for clinical BNCT at Petten. For the v...
This study aims to determine the activation contamination in the metal-based ionization chambers, i....
[[abstract]]This paper describes modifications to an original design, correction factors and uncerta...
Purpose: In Japan, calibration of therapy-level dosimeter with absorbed dose to water have been perf...
New methods are required for a better interpretation of the response of ionisation chambers in order...
The dual ionisation chamber technique is the recommended method for mixed field dosimetry of epither...
Magnesium-walled argon gas flow ionization chamber (Mg(Ar)) is used for photon dose measurements in ...
Photon quality correction factors (kQy) for ionization chamber photon dosimetry in an epithermal neu...
The mixed neutron-photon beam of FiR 1 reactor is used for boron-neutron capture therapy (BNCT) in F...
The absorbed dose-to-water calibration coefficients ND,W of some ionization chambers were determine...
Absorbed dose to water calibrations of NE Technology Type 2561 chambers are carried out at the Natio...
The validity of the twin ionisation chamber technique for determination of gamma and neutron doses i...
With the development of the water calorimeter direct measurement of absorbed dose in water becomes p...
High energy photon (over 10 MeV) and neutron beams adopted in radiobiology and radiotherapy always p...
For an accurate determination of the absorbed doses in complex radiation fields (e.g. mixed neutron-...
An epithermal neutron beam from the High Flux Reactor is used for clinical BNCT at Petten. For the v...
This study aims to determine the activation contamination in the metal-based ionization chambers, i....
[[abstract]]This paper describes modifications to an original design, correction factors and uncerta...
Purpose: In Japan, calibration of therapy-level dosimeter with absorbed dose to water have been perf...
New methods are required for a better interpretation of the response of ionisation chambers in order...
The dual ionisation chamber technique is the recommended method for mixed field dosimetry of epither...