Silicon layer transfer using plasma hydrogenation

In this work, we demonstrate a novel approach for the transfer of Si layers onto handle wafers, induced by plasma hydrogenation. In the conventional ion-cut process, hydrogen ion implantation is used to initiate layer delamination at a desired depth, which leads to ion damage in the transferred layer. In this study, we investigated the use of plasma hydrogenation to achieve high-quality layer transfer. To place hydrogen atoms introduced during plasma hydrogenation at a specific depth, a uniform trapping layer for H atoms must be prepared in the substrate before hydrogenation. The hydrogenated Si wafer was then bonded to another Si wafer coated with a thermal oxide, followed by thermal annealing to induce Si layer transfer. Cross-section transmission electron microscopy showed that the transferred Si layer was relatively free of lattice damage. The H trapping during plasma hydrogenation, and the subsequent layer delamination mechanism, are discussed. These results show direct evidence of the feasibility of using plasma hydrogenation to transfer relatively defect-free Si layers