As the European extension of the first CCT humidity key comparison, EUROMET.T-K6 was successfully completed in year 2008. After this comparison, a new low dew-point generator was introduced at LPM in Croatia as a result of progress in the EUROMET P912 project. With this new facility, the LPM uncertainties decreased significantly and the operating range became significantly wider. Therefore, it was decided to arrange a bilateral comparison between LPM and MIKES in Finland providing a link to EUROMET.T-K6 and CCT-K6. This comparison was carried out in a manner similar to other K6 comparisons but only one transfer standard was used instead of two units and the measurement point −70 °C was added to the measurement scheme. At all measurement poi...
To extend the dew-point range and to improve the uncertainties of the humidity scale realization at ...
For the investigation of the dew-point temperature scale realized by the MIKES primary dew-point gen...
This report presents the results of the EUROMET regional key comparison corresponding to CCT-K3 and ...
The first European humidity key comparison EURAMET-T.K6 was completed in 2008, and it covered the de...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In order to assure the quality of dew-point measurements, a bilateral comparison between the Nationa...
A bilateral comparison between UME and IMGC was carried out in the field of humidity from 30C to 60...
Generator systems realizing a dew-point temperature scale were compared using a chilled-mirror hygro...
In order to compare the humidity standards at the Centre Technique des Industries Aérauliques et The...
Three European National Metrology Institutes (NMIs), VSL, LNE-CETIAT and INRiM, extended their relat...
An implementation of a new low-range primary humidity generator as a part of an international collab...
Lately demands for traceability and improved accuracy in climatic humidity measurements at extreme c...
A new method for comparing dew-point generators was developed at the Centre for Metrology and Accred...
EUROMET collaborative project has been set up between Finish Centre for Metrology and Accreditation ...
To extend the dew-point range and to improve the uncertainties of the humidity scale realization at ...
For the investigation of the dew-point temperature scale realized by the MIKES primary dew-point gen...
This report presents the results of the EUROMET regional key comparison corresponding to CCT-K3 and ...
The first European humidity key comparison EURAMET-T.K6 was completed in 2008, and it covered the de...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corres...
In order to assure the quality of dew-point measurements, a bilateral comparison between the Nationa...
A bilateral comparison between UME and IMGC was carried out in the field of humidity from 30C to 60...
Generator systems realizing a dew-point temperature scale were compared using a chilled-mirror hygro...
In order to compare the humidity standards at the Centre Technique des Industries Aérauliques et The...
Three European National Metrology Institutes (NMIs), VSL, LNE-CETIAT and INRiM, extended their relat...
An implementation of a new low-range primary humidity generator as a part of an international collab...
Lately demands for traceability and improved accuracy in climatic humidity measurements at extreme c...
A new method for comparing dew-point generators was developed at the Centre for Metrology and Accred...
EUROMET collaborative project has been set up between Finish Centre for Metrology and Accreditation ...
To extend the dew-point range and to improve the uncertainties of the humidity scale realization at ...
For the investigation of the dew-point temperature scale realized by the MIKES primary dew-point gen...
This report presents the results of the EUROMET regional key comparison corresponding to CCT-K3 and ...