Add to ORKGThe report summarizes the results of EURAMET project # 1172 on a bilateral comparison of power and energy measurement capabilities in MIKES, Finland and SP, Sweden in 2010-2011. A portable three phase reference energy meter was calibrated by the two institutes. Both active and reactive power as well as active and reactive energy measurements were compared. The expanded comparison uncertainty (k=2) ranged from 0.015 % for active power up to 0.06 % for some reactive power measurements. All measured values agreed within the expanded comparison uncertainties
This paper presents some methodologies for reactive energy measurement, considering three modern pow...
An improved power standard derived from a current comparator power bridge for calibrating active/rea...
Measurement uncertainty is a key component in the overall uncertainty calculation for Measurement an...
The report summarizes the results of EURAMET project # 1172 on a bilateral comparison of power and e...
This paper describes the results of a bilateral three-phase power comparison between SP, Sweden and ...
The results of a bilateral comparison on active/reactive power meter calibrations between the Nation...
This paper presents the results of a comparison of active/reactive power meter calibrations between ...
The results of a comparison of active/reactive power meter calibrations between the National Institu...
Electric power and energy measurements are probably the most important and critical measurements in ...
Electric energy meters are designed to account energy under sinusoidal and nonsinusoidal conditions,...
Main text The intercomparison consisted of calibrating a High Voltage Travelling Reference Measuring...
The technical surveillance of secondary calibration laboratories accredited according to the ISO/IEC...
The problem on measurement of AC power in single phase or three-phase networks is always very import...
This paper describes a new three-phase power measurement setup to be used as a national power standa...
From 2010 to 2012, a key comparison of energy standards at 50/60 Hz was conducted in the SIM region....
This paper presents some methodologies for reactive energy measurement, considering three modern pow...
An improved power standard derived from a current comparator power bridge for calibrating active/rea...
Measurement uncertainty is a key component in the overall uncertainty calculation for Measurement an...
The report summarizes the results of EURAMET project # 1172 on a bilateral comparison of power and e...
This paper describes the results of a bilateral three-phase power comparison between SP, Sweden and ...
The results of a bilateral comparison on active/reactive power meter calibrations between the Nation...
This paper presents the results of a comparison of active/reactive power meter calibrations between ...
The results of a comparison of active/reactive power meter calibrations between the National Institu...
Electric power and energy measurements are probably the most important and critical measurements in ...
Electric energy meters are designed to account energy under sinusoidal and nonsinusoidal conditions,...
Main text The intercomparison consisted of calibrating a High Voltage Travelling Reference Measuring...
The technical surveillance of secondary calibration laboratories accredited according to the ISO/IEC...
The problem on measurement of AC power in single phase or three-phase networks is always very import...
This paper describes a new three-phase power measurement setup to be used as a national power standa...
From 2010 to 2012, a key comparison of energy standards at 50/60 Hz was conducted in the SIM region....
This paper presents some methodologies for reactive energy measurement, considering three modern pow...
An improved power standard derived from a current comparator power bridge for calibrating active/rea...
Measurement uncertainty is a key component in the overall uncertainty calculation for Measurement an...