Add to ORKGHVOF-sprayed ceramic coatings can be considered as potential candidates for applications where good chemical and corrosion resistance of ceramics is needed.Due to the less porous structure of the HVOF-sprayed coating as compared to the plasma sprayed one, the protection capability of the coating is increased.Despite the dense structure, the coating properties are inferior as compared to bulk ceramics because of pores and microcracks, which influence adversely the coating properties (i.e., toughness, hardness and wear resistance).Improved mechanical properties have widely been demonstrated for bulk nanocrystalline materials.Especially with ceramic materials the decreasing of grain size has been found to be favorable.Dense nanostructured cera...
Mechanical properties and wear behaviour of ceramic matrix composites are strongly affected by the s...
This study aims for deeper understanding of the composition and phase changes occurring during HVOF ...
Thermal spraying (TS) is increasingly used to deposit thick wear resistant coatings on machine and e...
HVOF-sprayed ceramic coatings can be considered as potential candidates for applications where good ...
Special nanoreinforced ceramic composite coatings were produced. Dense nanostructured alumina and ch...
Improved mechanical properties have widely been demonstrated for bulk nanocrystalline materials. Esp...
HVOF spraying has been demonstrated to produce dense ceramic coatings with improved density and mech...
HVOF sprayed ceramic coatings can be considered as potential candidates for applications, where good...
Plasma sprayed oxides are effective coatings against wear and corrosion. Low particle velocity in th...
Nanostructured and composite WC-12Co coatings were prepared by means of the supersonic spray process...
Few papers deal with High Velocity Oxygen-Fuel (HVOF)sprayed ceramics. This two-part study thoroughl...
The potential of the high velocity oxy-fuel (HVOF) thermal spray process to produce coatings with re...
Special mechanical properties have widely been demonstrated with bulk nanocrystalline materials. An ...
Thermal spraying is a solvent-less and low-VOC technique for producing polymer and polymer composite...
Nanostructured and conventional titania (TiO2) feedstocks were thermal sprayed using air plasma spra...
Mechanical properties and wear behaviour of ceramic matrix composites are strongly affected by the s...
This study aims for deeper understanding of the composition and phase changes occurring during HVOF ...
Thermal spraying (TS) is increasingly used to deposit thick wear resistant coatings on machine and e...
HVOF-sprayed ceramic coatings can be considered as potential candidates for applications where good ...
Special nanoreinforced ceramic composite coatings were produced. Dense nanostructured alumina and ch...
Improved mechanical properties have widely been demonstrated for bulk nanocrystalline materials. Esp...
HVOF spraying has been demonstrated to produce dense ceramic coatings with improved density and mech...
HVOF sprayed ceramic coatings can be considered as potential candidates for applications, where good...
Plasma sprayed oxides are effective coatings against wear and corrosion. Low particle velocity in th...
Nanostructured and composite WC-12Co coatings were prepared by means of the supersonic spray process...
Few papers deal with High Velocity Oxygen-Fuel (HVOF)sprayed ceramics. This two-part study thoroughl...
The potential of the high velocity oxy-fuel (HVOF) thermal spray process to produce coatings with re...
Special mechanical properties have widely been demonstrated with bulk nanocrystalline materials. An ...
Thermal spraying is a solvent-less and low-VOC technique for producing polymer and polymer composite...
Nanostructured and conventional titania (TiO2) feedstocks were thermal sprayed using air plasma spra...
Mechanical properties and wear behaviour of ceramic matrix composites are strongly affected by the s...
This study aims for deeper understanding of the composition and phase changes occurring during HVOF ...
Thermal spraying (TS) is increasingly used to deposit thick wear resistant coatings on machine and e...