Add to ORKGGood tribological properties and low coefficient of friction have previously been reported for thermally sprayed quasicrystalline coatings. In this paper HVOF spray parameter optimization and tribological properties of quasicrystalline coatings, manufactured from three different compositions, is discussed. On-line diagnostics measurements and splat studies were performed to optimize spray parameters of HVOF. Quasicrystalline coatings were produced and the coating microstructure was analysed. Large amount of wear and friction tests were performed to determine the tribological properties of quasicrystalline coating. Relatively high values of the coefficient of friction were obtained in the PoD-test. These tests yielded friction values varying...
Attention in this paper is devoted to the evaluation of wear coatings deposited using HVOF technolog...
This paper provides a comprehensive characterisation of HVOF- and HVAF-sprayed Cr3C2-25 wt.% NiCr ha...
The microstructure and micromechanical behavior of thermally sprayed Fe-based coatings manufactured ...
Good tribological properties and low coefficient of friction have previously been reported for therm...
This work studies FeVCrC-based coatings as potential alternatives to conventional Ni- and Co-based a...
One of the foremost coating methods for combating wear is thermal spraying, however, despite its wid...
This paper presents the results of a comparative study conducted to compare the friction and wear be...
In this article, the attention is paid to the HVOF (High Velocity Oxygen Fuel) thermal spraying meth...
This paper presents the results of a comparative study conducted to compare the friction and wear be...
In the thermal spray process the coating is built up from lamellas formed by rapid solidification of...
In the current study a Cr3C2–Ni spray powder was produced by mechanically activated thermal synthesi...
The tribological properties of part surfaces, namely their wear resistance and friction properties, ...
As the regulatory limitations of hard-chrome plating surge, the successful application of thermal- s...
Abstract. Stellite 6 Co-Cr-W-C coatings were sprayed by HVOF while systematically varying the sprayi...
Thermally sprayed coatings are often used to enhance the surface properties (wear resistance, corros...
Attention in this paper is devoted to the evaluation of wear coatings deposited using HVOF technolog...
This paper provides a comprehensive characterisation of HVOF- and HVAF-sprayed Cr3C2-25 wt.% NiCr ha...
The microstructure and micromechanical behavior of thermally sprayed Fe-based coatings manufactured ...
Good tribological properties and low coefficient of friction have previously been reported for therm...
This work studies FeVCrC-based coatings as potential alternatives to conventional Ni- and Co-based a...
One of the foremost coating methods for combating wear is thermal spraying, however, despite its wid...
This paper presents the results of a comparative study conducted to compare the friction and wear be...
In this article, the attention is paid to the HVOF (High Velocity Oxygen Fuel) thermal spraying meth...
This paper presents the results of a comparative study conducted to compare the friction and wear be...
In the thermal spray process the coating is built up from lamellas formed by rapid solidification of...
In the current study a Cr3C2–Ni spray powder was produced by mechanically activated thermal synthesi...
The tribological properties of part surfaces, namely their wear resistance and friction properties, ...
As the regulatory limitations of hard-chrome plating surge, the successful application of thermal- s...
Abstract. Stellite 6 Co-Cr-W-C coatings were sprayed by HVOF while systematically varying the sprayi...
Thermally sprayed coatings are often used to enhance the surface properties (wear resistance, corros...
Attention in this paper is devoted to the evaluation of wear coatings deposited using HVOF technolog...
This paper provides a comprehensive characterisation of HVOF- and HVAF-sprayed Cr3C2-25 wt.% NiCr ha...
The microstructure and micromechanical behavior of thermally sprayed Fe-based coatings manufactured ...