Laser induced breakdown spectroscopy (LIBS) has been applied to study ITER-relevant coatings with different surface morphology and crystallinity. LIBS elemental depth profiles were compared with those obtained by secondary ion mass spectrometry (SIMS). Depending on surface morphology and crystallinity, the laser ablation rate of the coatings changed by an order of magnitude, the highest ablation rate had samples prepared by thermoionic vacuum discharge. The inclusion of aluminum (proxy for beryllium) increased the ablation rate by a factor of>6. In addition, for W-Al coatings the ablation was non-stoichiometric
Laser-induced breakdown spectroscopy (LIBS) has been applied to analysis aluminum alloy targets. Th...
The Laser-Induced Breakdown Spectroscopy (LIBS) technique is tested to control the ablation of a tun...
Thesis (Master)--İzmir Institute of Technology, Chemistry, İzmir, 2008Includes bibliographical refer...
The aim of this work was to study the applicability of laser induced breakdown spectroscopy (LIBS) a...
In this article, laser induced breakdown spectroscopy (LIBS) has been used to study plasma-induced e...
Laser-induced breakdown spectroscopy (LIBS) experiments on different ITER-relevant beryllium-tungste...
Laser-induced breakdown spectroscopy (LIBS), based on studying the spectrum emitted in a laser ablat...
Laser Induced Breakdown Spectroscopy (LIBS) is a potential candidate to monitor the layer compositio...
We have investigated the applicability of Laser Induced Breakdown Spectroscopy (LIBS) for analyzing ...
We discuss the applicability of laser induced breakdown spectroscopy (LIBS) for deuterium retention ...
The quantitative analysis and depth profiling of a co-deposition simulating the impurity of the inte...
Laser-induced breakdown spectroscopy (LIBS), based on studying the spectrum emitted in a laser ablat...
The ablation and fuel-retention characteristics of aluminum–tungsten (AlW) and beryllium–tungsten (B...
Samples with tungsten (W) and tungsten-yttrium (Y) coatings on molybdenum were exposed to plasmas si...
Laser-induced breakdown spectroscopy (LIBS) has been applied to analysis aluminum alloy targets. The...
Laser-induced breakdown spectroscopy (LIBS) has been applied to analysis aluminum alloy targets. Th...
The Laser-Induced Breakdown Spectroscopy (LIBS) technique is tested to control the ablation of a tun...
Thesis (Master)--İzmir Institute of Technology, Chemistry, İzmir, 2008Includes bibliographical refer...
The aim of this work was to study the applicability of laser induced breakdown spectroscopy (LIBS) a...
In this article, laser induced breakdown spectroscopy (LIBS) has been used to study plasma-induced e...
Laser-induced breakdown spectroscopy (LIBS) experiments on different ITER-relevant beryllium-tungste...
Laser-induced breakdown spectroscopy (LIBS), based on studying the spectrum emitted in a laser ablat...
Laser Induced Breakdown Spectroscopy (LIBS) is a potential candidate to monitor the layer compositio...
We have investigated the applicability of Laser Induced Breakdown Spectroscopy (LIBS) for analyzing ...
We discuss the applicability of laser induced breakdown spectroscopy (LIBS) for deuterium retention ...
The quantitative analysis and depth profiling of a co-deposition simulating the impurity of the inte...
Laser-induced breakdown spectroscopy (LIBS), based on studying the spectrum emitted in a laser ablat...
The ablation and fuel-retention characteristics of aluminum–tungsten (AlW) and beryllium–tungsten (B...
Samples with tungsten (W) and tungsten-yttrium (Y) coatings on molybdenum were exposed to plasmas si...
Laser-induced breakdown spectroscopy (LIBS) has been applied to analysis aluminum alloy targets. The...
Laser-induced breakdown spectroscopy (LIBS) has been applied to analysis aluminum alloy targets. Th...
The Laser-Induced Breakdown Spectroscopy (LIBS) technique is tested to control the ablation of a tun...
Thesis (Master)--İzmir Institute of Technology, Chemistry, İzmir, 2008Includes bibliographical refer...