The energy distribution of sputtered and ionized metal atoms as well as ions from the sputtering gas is reported for a high power impulse magnetron sputtering (HIPIMS) discharge. High power pulses were applied to a conventional planar circular magnetron Ti target. The peak power on the target surface was 1-2 kW/cm(2) with a duty factor of about 0.5%. Time resolved, and time averaged ion energy distributions were recorded with an energy resolving quadrupole mass spectrometer. The ion energy distributions recorded for the HIPIMS discharge are broader with maximum detected energy of 100 eV and contain a larger fraction of highly energetic ions (about 50% with E-i > 20 eV) as compared to a conventional direct current magnetron sputtering discha...
High power impulse magnetron sputtering (HIPIMS) discharges produce metal ions with energies up to 1...
The angular dependence of the deposition rates due to ions and neutrals in high-power impulse magnet...
expressed in function of the RFEA’s discriminator voltage. The HiPIMS voltage values are shown at th...
Plasma composition near the substrate was investigated in a high power impulse magnetron sputtering ...
The ion energy distribution function (IEDF) in high power impulse magnetron sputtering (HIPIMS) disc...
High-power impulse magnetron sputter deposition of metallic films was investigated. Time-averaged ma...
High power impulse magnetron sputtering (HIPIMS) is a novel deposition technology successfully imple...
A technique for obtaining high time resolution ion energy distribution functions (IEDFs) at the subs...
The plasma composition of high power impulse magnetron sputtering (HIPIMS) has been studied for tita...
International audienceThe plasma composition of high power impulse magnetron sputtering (HIPIMS) has...
The high power impulse magnetron sputtering (HiPIMS) discharge is a recent addition to plasma based ...
International audienceThe proportion of metal ions in a High Power Impulse Magnetron Sputtering disc...
International audienceIn this paper, mass spectrometry was used to measure the ion energy distributi...
Mass spectroscopy was used to analyze the energy and composition of the ion flux during high power p...
International audienceIn this paper, mass spectrometry was used to measure the ion energy distributi...
High power impulse magnetron sputtering (HIPIMS) discharges produce metal ions with energies up to 1...
The angular dependence of the deposition rates due to ions and neutrals in high-power impulse magnet...
expressed in function of the RFEA’s discriminator voltage. The HiPIMS voltage values are shown at th...
Plasma composition near the substrate was investigated in a high power impulse magnetron sputtering ...
The ion energy distribution function (IEDF) in high power impulse magnetron sputtering (HIPIMS) disc...
High-power impulse magnetron sputter deposition of metallic films was investigated. Time-averaged ma...
High power impulse magnetron sputtering (HIPIMS) is a novel deposition technology successfully imple...
A technique for obtaining high time resolution ion energy distribution functions (IEDFs) at the subs...
The plasma composition of high power impulse magnetron sputtering (HIPIMS) has been studied for tita...
International audienceThe plasma composition of high power impulse magnetron sputtering (HIPIMS) has...
The high power impulse magnetron sputtering (HiPIMS) discharge is a recent addition to plasma based ...
International audienceThe proportion of metal ions in a High Power Impulse Magnetron Sputtering disc...
International audienceIn this paper, mass spectrometry was used to measure the ion energy distributi...
Mass spectroscopy was used to analyze the energy and composition of the ion flux during high power p...
International audienceIn this paper, mass spectrometry was used to measure the ion energy distributi...
High power impulse magnetron sputtering (HIPIMS) discharges produce metal ions with energies up to 1...
The angular dependence of the deposition rates due to ions and neutrals in high-power impulse magnet...
expressed in function of the RFEA’s discriminator voltage. The HiPIMS voltage values are shown at th...