RC coupling beams with low-yield-point steel web panel in the mid-span (coupling beam damper) have been developed and applied to actual buildings. Cyclic loading tests had been performed, resulting that the coupling beam dampers provided the stable hysteretic performance and load carrying capacity did not deteriorate up to 1/20 of drift angle. In this paper, finite element analysis has been carried out to evaluate the shear buckling strength of the coupling beam damper. It is verified that the low-yield-point steel web panel (with width-thick ratio of about 15) of the coupling beam damper is thick enough to avoid shear buckling. Restoring force characteristics of the coupling beam dampers for structural design is also proposed. An appropria...
The fully developed laminar flow of a power-law non-Newtonian fluid in a concentric annulus with an ...
Micoorganisms capable of lysing the cell wall of the red yeast Rhodosporidium were isolated from the...
The crystal structure of PSII showed that one phosphatidylglycerol (PG) molecule (PG714) is located ...
RC coupling beams with low-yield-point steel web panel in the mid-span (coupling beam damper) have b...
The fully developed laminar heat transfer of a power-law non-Newtonian fluid in a concentric annulus...
RC shear walls coupled with beams are becoming widely used for high-rise buildings in Japan. Since s...
The authors conceived buckling‐restrained braces providing stable hysteretic characteristics even un...
Arc heated wind tunnel is usually used for hypersonic and supersonic heating test of thermal protect...
Fundamental solutions of the first and second kind boundary conditions were obtained analytically fo...
There are strong demmands for low-voltage operating OPA/OTA in deep sub-micron CMOS processes. We ha...
In order to attain a sound and sustainable water environment, integrated management of river and wat...
In attempt to clarify the effect of serial bathing on metabolic actions of noradrenaline (NA) by usi...
The effects of three parameters; the location of the partition of impeller, the bare ratio and the o...
A 2-year-old domestic cat discharged 2 small cestode segments (1mm × 1mm) into the stool on 16th in ...
Fe-C-Si eutectic alloys were melted and solidified under various cooling rates and pressures up to 1...
The fully developed laminar flow of a power-law non-Newtonian fluid in a concentric annulus with an ...
Micoorganisms capable of lysing the cell wall of the red yeast Rhodosporidium were isolated from the...
The crystal structure of PSII showed that one phosphatidylglycerol (PG) molecule (PG714) is located ...
RC coupling beams with low-yield-point steel web panel in the mid-span (coupling beam damper) have b...
The fully developed laminar heat transfer of a power-law non-Newtonian fluid in a concentric annulus...
RC shear walls coupled with beams are becoming widely used for high-rise buildings in Japan. Since s...
The authors conceived buckling‐restrained braces providing stable hysteretic characteristics even un...
Arc heated wind tunnel is usually used for hypersonic and supersonic heating test of thermal protect...
Fundamental solutions of the first and second kind boundary conditions were obtained analytically fo...
There are strong demmands for low-voltage operating OPA/OTA in deep sub-micron CMOS processes. We ha...
In order to attain a sound and sustainable water environment, integrated management of river and wat...
In attempt to clarify the effect of serial bathing on metabolic actions of noradrenaline (NA) by usi...
The effects of three parameters; the location of the partition of impeller, the bare ratio and the o...
A 2-year-old domestic cat discharged 2 small cestode segments (1mm × 1mm) into the stool on 16th in ...
Fe-C-Si eutectic alloys were melted and solidified under various cooling rates and pressures up to 1...
The fully developed laminar flow of a power-law non-Newtonian fluid in a concentric annulus with an ...
Micoorganisms capable of lysing the cell wall of the red yeast Rhodosporidium were isolated from the...
The crystal structure of PSII showed that one phosphatidylglycerol (PG) molecule (PG714) is located ...