Influence fo alkali metal doping on surface properties and catalytic activity/selectivity of CaO catalysts in oxidative coupling of methane

Surface properties (viz. surface area, basicity / base strength distribution and crystal phases) of alkali metal doped CaO (alkali metal/Ca = 0.1 and 0.4) catalysts and their catalytic activity/selectivity in oxidative coupling of methane (OCM) to higher hydrocarbons at different reaction conditions (viz. temperature, 700 and 750¬ C; CH4/O2?ratio, 4.0 and 8.0 and space velocity, 5140 - 20550 cm3.g-1.h-1) have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties (viz. surface area, basicity / base strength distribution) and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity (strong basic sites) and the C2+ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. There is no direct relationship between surface basicity and catalytic activity / selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO (Na/Ca = 0.1, before calcination) catalyst (calcined at 750¬ C), showed best performance (C2+selectivity of 68.8 % with 24.7 % methane conversion), whereas, the poorest performance was shown by the Rb-CaO catalyst in the OCM process