The coefficient of thermal expansion of γ-irradiated polyethylene has been measured from 10 to 340 K by using the three-terminal capacitance technique. The samples are irradiated to 500 Mrad in steps of 100 Mrad in air at room temperature with γ-rays from a Co<SUP>60</SUP> source at a dose rate of 0.3 Mrad/h. The crystallinity of the sample is measured by X-ray diffraction. The crystallinity is found to decrease with radiation dose. The thermal expansion coefficient is found to be constant with radiation doses from 10 to 110 K and decreases with doses from 110 to 340 K
The ultrasonic pulse-echo technique and differential thermal analysis were utilized to characterize ...
Linear low-density polyethylene (LLDPE), based on butene-1 or hexene-1, was irradiated with rays und...
The critical dose measured for polyethylene single crystals at 2 MV is increased by a factor of 4 be...
The coefficient of thermal expansion of $\gamma$-irradiated polyethylene has been measured from 10 t...
The coefficient of thermal expansion of gamma-irradiated polypropylene (PP) has been measured from 1...
A three-terminal capacitance technique has been used in the temperature range 80 to 340 K to measure...
The thermal expansion coefficient of gamma irradiated polyoxymethylene has been measured in the temp...
The thermal expansion coefficient of gamma-irradiated Polytetrafluoroethylene (PTFE) has been measur...
The thermal expansion coefficient of gamma-irradiated Polytetrafluoroethylene (PTFE) has been measur...
The thermal expansion coefficient of irradiated poly(methyl methacrylate) is measured in the tempera...
The coefficient of thermal expansion is measured for irradiated Polyvinyl Chloride (PVC) from 10K to...
The thermal expansion of polymeric parts can be an issue in many applications where the available sp...
Study of the thermal properties of irradiated poly-mers is very important from both a scientific and...
The density and thermal expansion behaviour of linear low density polyethylene, over the temperature...
Ultrahigh molecular weight polyethylene (UHMWPE) has been irradiated (0-40 Mrad) with a Co-60 source...
The ultrasonic pulse-echo technique and differential thermal analysis were utilized to characterize ...
Linear low-density polyethylene (LLDPE), based on butene-1 or hexene-1, was irradiated with rays und...
The critical dose measured for polyethylene single crystals at 2 MV is increased by a factor of 4 be...
The coefficient of thermal expansion of $\gamma$-irradiated polyethylene has been measured from 10 t...
The coefficient of thermal expansion of gamma-irradiated polypropylene (PP) has been measured from 1...
A three-terminal capacitance technique has been used in the temperature range 80 to 340 K to measure...
The thermal expansion coefficient of gamma irradiated polyoxymethylene has been measured in the temp...
The thermal expansion coefficient of gamma-irradiated Polytetrafluoroethylene (PTFE) has been measur...
The thermal expansion coefficient of gamma-irradiated Polytetrafluoroethylene (PTFE) has been measur...
The thermal expansion coefficient of irradiated poly(methyl methacrylate) is measured in the tempera...
The coefficient of thermal expansion is measured for irradiated Polyvinyl Chloride (PVC) from 10K to...
The thermal expansion of polymeric parts can be an issue in many applications where the available sp...
Study of the thermal properties of irradiated poly-mers is very important from both a scientific and...
The density and thermal expansion behaviour of linear low density polyethylene, over the temperature...
Ultrahigh molecular weight polyethylene (UHMWPE) has been irradiated (0-40 Mrad) with a Co-60 source...
The ultrasonic pulse-echo technique and differential thermal analysis were utilized to characterize ...
Linear low-density polyethylene (LLDPE), based on butene-1 or hexene-1, was irradiated with rays und...
The critical dose measured for polyethylene single crystals at 2 MV is increased by a factor of 4 be...