Add to ORKGIn this work we study the optimization of laser-fired contact (LFC) processing parameters, namely laser power and number of pulses, based on the electrical resistance measurement of an aluminum single LFC point. LFC process has been made through four passivation layers that are typically used in c-Si and mc-Si solar cell fabrication: thermally grown silicon oxide (SiO2), deposited phosphorus-doped amorphous silicon carbide (a-SiCx/H(n)), aluminum oxide (Al2O3) and silicon nitride (SiNx/H) films. Values for the LFC resistance normalized by the laser spot area in the range of 0.65–3 mΩ cm2 have been obtained.Peer Reviewe
This work investigates the influence of the laser wavelength on laser doping (LD) and laser - f...
Solid State Lasers (SSL) have been used in microelectronic and photovoltaic (PV) industry for decad...
In the Laser-Fired Contact (LFC) process, a laser beam fires a metallic layer through a dielectric p...
In this work we study the optimization of laser-fired contact (LFC) processing parameters, namely la...
In this work we study the optimization of laser-fired contact (LFC) processing parameters, namely la...
Laser Firing Contact (LFC) and Laser Doping (LD) have become potential alternatives to the Al BSF th...
AbstractIn this work, we study the optimization of aluminium laser-fired contacts (LFC) [1] in combi...
AbstractLaser Firing Contact (LFC) and Laser Doping (LD) have become potential alternatives to the A...
This paper is focused on the optimization of the rear contact scheme of p-type c-Si LFC-PERC high ef...
Scope of this work was to investigate the properties of 'Laser-fired Contacts (LFC)', a technique de...
This paper is focused on the optimization of the rear contact scheme of p-type c-Si LFC-PERC high ef...
AbstractLocal laser doping (LLD) and laser fired-contacts (LFC) are among the most promising techniq...
This work investigates the influence of the laser wavelength on laser doping (LD) and laser - fired ...
AbstractLocal laser doping (LLD) and laser fired-contacts (LFC) are among the most promising techniq...
Solid State Lasers (SSL) have been used in microelectronic and photovoltaic (PV) industry for decade...
This work investigates the influence of the laser wavelength on laser doping (LD) and laser - f...
Solid State Lasers (SSL) have been used in microelectronic and photovoltaic (PV) industry for decad...
In the Laser-Fired Contact (LFC) process, a laser beam fires a metallic layer through a dielectric p...
In this work we study the optimization of laser-fired contact (LFC) processing parameters, namely la...
In this work we study the optimization of laser-fired contact (LFC) processing parameters, namely la...
Laser Firing Contact (LFC) and Laser Doping (LD) have become potential alternatives to the Al BSF th...
AbstractIn this work, we study the optimization of aluminium laser-fired contacts (LFC) [1] in combi...
AbstractLaser Firing Contact (LFC) and Laser Doping (LD) have become potential alternatives to the A...
This paper is focused on the optimization of the rear contact scheme of p-type c-Si LFC-PERC high ef...
Scope of this work was to investigate the properties of 'Laser-fired Contacts (LFC)', a technique de...
This paper is focused on the optimization of the rear contact scheme of p-type c-Si LFC-PERC high ef...
AbstractLocal laser doping (LLD) and laser fired-contacts (LFC) are among the most promising techniq...
This work investigates the influence of the laser wavelength on laser doping (LD) and laser - fired ...
AbstractLocal laser doping (LLD) and laser fired-contacts (LFC) are among the most promising techniq...
Solid State Lasers (SSL) have been used in microelectronic and photovoltaic (PV) industry for decade...
This work investigates the influence of the laser wavelength on laser doping (LD) and laser - f...
Solid State Lasers (SSL) have been used in microelectronic and photovoltaic (PV) industry for decad...
In the Laser-Fired Contact (LFC) process, a laser beam fires a metallic layer through a dielectric p...