Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a buried heater and prepatterned interdigitated electrodes has been achieved that presents the advantage that it allows to easily and directly integrate the advantageous properties of quasi-one dimensional structures in an advanced electronic device by a Vapor Liquid Solid (VLS) mechanism. A NWs based sensor of this type is characterized as a low power gas sensor towards NH3 at different temperatures. Stable and reproducible response is obtained, that allows detecting concentrations below the time-weighted average exposure limit for 8 h
Ce congrès est un événement digital: 4th international nanoFIS 2020 conference – 100% Digital at hig...
Gas sensors based on the SnO2 thin films were prepared by dip-coating method starting from their cor...
Abstract – The results of research aimed at the gas sensing nanowires (NWs) engineering are presente...
AbstractLocalized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate...
Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a burie...
SnO2 NWs networks on heated micromembranes have been characterized as ammonia sensors. The approach ...
With the growth of nanotechnology during the last few decades, development of novel materials, devic...
AbstractSnO2 chemical sensors were fabricated by two different methods. The first one was based on c...
Developing metal oxide gas sensors for internet-of-things (IoT) and portable applications require lo...
Metal oxide nanowires have been deposited on 100nm SiO2/Si substrates and SnO2 and ZnO single nanowi...
The H2S gas sensing characterization of gas sensors based on the SnO2 nanowires network has been rep...
Metal oxide nanowires have been deposited on 100nm SiO2/Si substrates and SnO2and ZnO single nanowir...
The results of research aimed at the gas sensing nanowires (NWs) engineering are presented. Structur...
The long duration of a working device with a limited battery capacity requires gas sensors with low ...
Monitoring of toxic gas in air is important because air pollution, especially in developing countrie...
Ce congrès est un événement digital: 4th international nanoFIS 2020 conference – 100% Digital at hig...
Gas sensors based on the SnO2 thin films were prepared by dip-coating method starting from their cor...
Abstract – The results of research aimed at the gas sensing nanowires (NWs) engineering are presente...
AbstractLocalized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate...
Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a burie...
SnO2 NWs networks on heated micromembranes have been characterized as ammonia sensors. The approach ...
With the growth of nanotechnology during the last few decades, development of novel materials, devic...
AbstractSnO2 chemical sensors were fabricated by two different methods. The first one was based on c...
Developing metal oxide gas sensors for internet-of-things (IoT) and portable applications require lo...
Metal oxide nanowires have been deposited on 100nm SiO2/Si substrates and SnO2 and ZnO single nanowi...
The H2S gas sensing characterization of gas sensors based on the SnO2 nanowires network has been rep...
Metal oxide nanowires have been deposited on 100nm SiO2/Si substrates and SnO2and ZnO single nanowir...
The results of research aimed at the gas sensing nanowires (NWs) engineering are presented. Structur...
The long duration of a working device with a limited battery capacity requires gas sensors with low ...
Monitoring of toxic gas in air is important because air pollution, especially in developing countrie...
Ce congrès est un événement digital: 4th international nanoFIS 2020 conference – 100% Digital at hig...
Gas sensors based on the SnO2 thin films were prepared by dip-coating method starting from their cor...
Abstract – The results of research aimed at the gas sensing nanowires (NWs) engineering are presente...