Add to ORKGIt was considered the influence of the conditions for obtaining polyacrylonitrile fibers on their properties. It has been shown the possibility of obtaining polyacrylonitrile fibrous materials with increased strength based on domestic polymer raw material
In this paper, the technology of molding composite materials based on polyurethane waste. The influe...
Krul Mechislav, Orlovich Roman Boleslavovich. Problems of strength and reduction of material consump...
The changes of the mechanical properties of the materials during cutting were investigated. It was s...
It was considered the influence of the conditions for obtaining polyacrylonitrile fibers on their pr...
The problem of degradation of polymers. Analyzes the effect of the type recycling on the properties ...
The methods of physico-chemical and chemical modification of industrial polyacrylonitrile fibers to ...
The comparative study the influence of the content and constant magnetic and electrical fields upon ...
The purpose of work is the establishment of optimum modes of influences at formation of systems of m...
The paper is devoted to feasibility of creation of ceramic materials for heating aggregates on the b...
The objective of the investigation was determination of properties of textile materials with nanofib...
В статье рассмотрены физико-механические свойства древесно-полимерных композитов с измельченными лис...
The article summarizes some results of research in the field of resource-saving technologies of PTFE...
The possibility of using Chinese raw materials (pellets) made using the LFT-G technology in the prod...
A new way of obtaining products of boron carbide powders with upgraded strength characteristics lead...
The size particles of ferric, chromyl and copper oxides in the range 20-60 nm has been achieved by t...
In this paper, the technology of molding composite materials based on polyurethane waste. The influe...
Krul Mechislav, Orlovich Roman Boleslavovich. Problems of strength and reduction of material consump...
The changes of the mechanical properties of the materials during cutting were investigated. It was s...
It was considered the influence of the conditions for obtaining polyacrylonitrile fibers on their pr...
The problem of degradation of polymers. Analyzes the effect of the type recycling on the properties ...
The methods of physico-chemical and chemical modification of industrial polyacrylonitrile fibers to ...
The comparative study the influence of the content and constant magnetic and electrical fields upon ...
The purpose of work is the establishment of optimum modes of influences at formation of systems of m...
The paper is devoted to feasibility of creation of ceramic materials for heating aggregates on the b...
The objective of the investigation was determination of properties of textile materials with nanofib...
В статье рассмотрены физико-механические свойства древесно-полимерных композитов с измельченными лис...
The article summarizes some results of research in the field of resource-saving technologies of PTFE...
The possibility of using Chinese raw materials (pellets) made using the LFT-G technology in the prod...
A new way of obtaining products of boron carbide powders with upgraded strength characteristics lead...
The size particles of ferric, chromyl and copper oxides in the range 20-60 nm has been achieved by t...
In this paper, the technology of molding composite materials based on polyurethane waste. The influe...
Krul Mechislav, Orlovich Roman Boleslavovich. Problems of strength and reduction of material consump...
The changes of the mechanical properties of the materials during cutting were investigated. It was s...