Influence of dispersed heat-resistant additives on ignition and combustion of heterogeneous systems

Influence of dispersion aluminum powder on the burning rate of mixed solid fuel

Nikolay Zolotorev
Yana Dubkova
Aleksey Konovalenko

August 2018

In work results of experimental study of influence dispersion of metal powder on burning rate in mix...

Heat and mass transfer at the ignition of vapors of volatile liquid fuels by hot metal core: Experimental study and modelling

Glushkov, Dmitrii D.O.
Legros, Jean Claude
Strizhak, Pavel P.A.
Volkov, Roman R.S.

January 2016

Measurements are reported on the main factors and mechanisms of heat and mass transfer controlling t...

Effect of Metal Additives on the Combustion Characteristics of High-Energy Materials

Alexander Korotkikh
Oleg Glotov
Ivan Sorokin

August 2016

Thermodynamic calculation of combustion parameters and equilibrium composition of HEMs combustion pr...

Influence of Dispersed Heat-Resistant Additives on Ignition and Combustion of Heterogeneous Systems

Arkhipov V.A.
Astakhov A.L.
Kuznetsov V.T.

January 2015

The results of experimental studies of the effect of dispersion of heat-resistant additives powders ...

Influence of dispersed heat-resistant additives on ignition and combustion of heterogeneous systems

Arkhipov, Vladimir A.
Astakhov, Alexey L.
Kuznetsov, Valeriy T.

January 2015

The results of experimental studies of the effect of dispersion of heat-resistant additives powders ...

Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives

Tingas, Efstathios Al.
Kyritsis, Dimitrios C.
Goussis, Dimitris A.

April 2016

The effect of selected additives on the ignition delay of ethanol (EtOH)/air and dimethylether (DME)...

Effect of Me/B-powder on the ignition of high-energy materials

Korotkikh, Alexander G.
Sorokin, Ivan V.

January 2021

The study of the ignition characteristics of highenergy materials (HEMs) is important in solving a n...

Experimental investigation of the influence of inert solids on ignition sensitivity of organic powders

Janes, Agnès
Vignes, Alexis
Dufaud, Olivier
Carson, Douglas

July 2014

International audienceThis work presents the results of the experimental characterization of the ign...

Numerical study of heat and mass transfer during ignition of thermal decomposition products of a coal particle

Dmitrii O. Glushkov
Olga V. Vysokomornaya

December 2014

A numerical research was executed for macroscopic regularities determination of heat and mass transf...

Technique of the research of characteristics of ignition of the condensed systems to variables heat flux

Nikolay N. Zolotorev
Vladimir A. Arkhipov
Eugene A. Maslov

December 2016

This paper presents a method for determining the ignition delay time of condensed systems when expos...

A study of the spontaneous ignition delay of hot lean mixtures of gaseous hydrocarbon fuels and air in a flow system.

Irwin, Roland. E.

January 1957

A new apparatus was designed and built to study the ignition delay of propane and other gaseous fuel...

Influence of the metal particle size on the ignition of energetic materials

Weiser, V.
Kelzenberg, S.
Eisenreich, N.

January 2001

A theoretical study of multi-particle ignition uses a hot spot model which calculates the temperatur...

Kinetic Characteristics of Ignition Dispersed Condensed Substance Single Heated to a High Temperature of the Particles

Dmitriy O. Glushkov
Arkadiy V. Zakharevich
Dmitriy N. Tsymbalov

February 2016

Kinetic parameters of ignition are defined by the results of performed experimental and theoretical ...

Ignition Delay Times Of Composite Solid Propellants Using Novel Nano-Additive Catalysts

Demko, Andrew R.
Dillier, Catherine
Sammet, Thomas
Petersen, Eric L.
Reid, David L.

January 2018

The ignition delay times tign of propellants provide insight for the fundamental understanding of th...

Modeling of ignition and combustion of boron-containing solid propellants

Arkhipov, Vladimir A.
Basalaev, Sergey A.
Kuznetsov, Valeriy T.
Poryazov, Vasily A.
Fedorychev, A. V.

January 2021

This paper presents the results of an experimental study of the ignition and slagging characteristic...

Influence of dispersion aluminum powder on the burning rate of mixed solid fuel

Nikolay Zolotorev
Yana Dubkova
Aleksey Konovalenko

August 2018

In work results of experimental study of influence dispersion of metal powder on burning rate in mix...

Heat and mass transfer at the ignition of vapors of volatile liquid fuels by hot metal core: Experimental study and modelling

Glushkov, Dmitrii D.O.
Legros, Jean Claude
Strizhak, Pavel P.A.
Volkov, Roman R.S.

January 2016

Measurements are reported on the main factors and mechanisms of heat and mass transfer controlling t...

Effect of Metal Additives on the Combustion Characteristics of High-Energy Materials

Alexander Korotkikh
Oleg Glotov
Ivan Sorokin

August 2016

Thermodynamic calculation of combustion parameters and equilibrium composition of HEMs combustion pr...

Influence of Dispersed Heat-Resistant Additives on Ignition and Combustion of Heterogeneous Systems

Arkhipov V.A.
Astakhov A.L.
Kuznetsov V.T.

January 2015

The results of experimental studies of the effect of dispersion of heat-resistant additives powders ...

Influence of dispersed heat-resistant additives on ignition and combustion of heterogeneous systems

Arkhipov, Vladimir A.
Astakhov, Alexey L.
Kuznetsov, Valeriy T.

January 2015

The results of experimental studies of the effect of dispersion of heat-resistant additives powders ...

Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives

Tingas, Efstathios Al.
Kyritsis, Dimitrios C.
Goussis, Dimitris A.

April 2016

The effect of selected additives on the ignition delay of ethanol (EtOH)/air and dimethylether (DME)...

Effect of Me/B-powder on the ignition of high-energy materials

Korotkikh, Alexander G.
Sorokin, Ivan V.

January 2021

The study of the ignition characteristics of highenergy materials (HEMs) is important in solving a n...

Experimental investigation of the influence of inert solids on ignition sensitivity of organic powders

Janes, Agnès
Vignes, Alexis
Dufaud, Olivier
Carson, Douglas

July 2014

International audienceThis work presents the results of the experimental characterization of the ign...

Numerical study of heat and mass transfer during ignition of thermal decomposition products of a coal particle

Dmitrii O. Glushkov
Olga V. Vysokomornaya

December 2014

A numerical research was executed for macroscopic regularities determination of heat and mass transf...

Technique of the research of characteristics of ignition of the condensed systems to variables heat flux

Nikolay N. Zolotorev
Vladimir A. Arkhipov
Eugene A. Maslov

December 2016

This paper presents a method for determining the ignition delay time of condensed systems when expos...

A study of the spontaneous ignition delay of hot lean mixtures of gaseous hydrocarbon fuels and air in a flow system.

Irwin, Roland. E.

January 1957

A new apparatus was designed and built to study the ignition delay of propane and other gaseous fuel...

Influence of the metal particle size on the ignition of energetic materials

Weiser, V.
Kelzenberg, S.
Eisenreich, N.

January 2001

A theoretical study of multi-particle ignition uses a hot spot model which calculates the temperatur...

Kinetic Characteristics of Ignition Dispersed Condensed Substance Single Heated to a High Temperature of the Particles

Dmitriy O. Glushkov
Arkadiy V. Zakharevich
Dmitriy N. Tsymbalov

February 2016

Kinetic parameters of ignition are defined by the results of performed experimental and theoretical ...

Ignition Delay Times Of Composite Solid Propellants Using Novel Nano-Additive Catalysts

Demko, Andrew R.
Dillier, Catherine
Sammet, Thomas
Petersen, Eric L.
Reid, David L.

January 2018

The ignition delay times tign of propellants provide insight for the fundamental understanding of th...

Modeling of ignition and combustion of boron-containing solid propellants

Arkhipov, Vladimir A.
Basalaev, Sergey A.
Kuznetsov, Valeriy T.
Poryazov, Vasily A.
Fedorychev, A. V.

January 2021

This paper presents the results of an experimental study of the ignition and slagging characteristic...

Influence of dispersion aluminum powder on the burning rate of mixed solid fuel

Nikolay Zolotorev
Yana Dubkova
Aleksey Konovalenko

August 2018

In work results of experimental study of influence dispersion of metal powder on burning rate in mix...

Heat and mass transfer at the ignition of vapors of volatile liquid fuels by hot metal core: Experimental study and modelling

Glushkov, Dmitrii D.O.
Legros, Jean Claude
Strizhak, Pavel P.A.
Volkov, Roman R.S.

January 2016

Measurements are reported on the main factors and mechanisms of heat and mass transfer controlling t...

Effect of Metal Additives on the Combustion Characteristics of High-Energy Materials

Alexander Korotkikh
Oleg Glotov
Ivan Sorokin

August 2016

Thermodynamic calculation of combustion parameters and equilibrium composition of HEMs combustion pr...

Influence of dispersed heat-resistant additives on ignition and combustion of heterogeneous systems

Abstract

Extracted data

Influence of dispersed heat-resistant additives on ignition and combustion of heterogeneous systems

Abstract

Extracted data

Related items

Related items