© The author(s). This paper is focused on the possibility of using magnetite powders obtained by chemical and plasma-chemical method for sorption concentration of arsenic ions. Processes of arsenic concentration by two-site sorption in magnetite-water system have been studied, and the optimal conditions for concentration have been defined. In static mode, effects of pH, temperature and contact time on the adsorption process have been studied. As a result, a method for pre-sorption concentration has been proposed, allowing reducing the lower limit of the atomic absorption determination of arsenic content
Development of reliable, environmentally safe and economically advantageous methods of water purific...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Abstract Aims: Arsenic contamination of natural water resources has become an important environmen...
© The author(s). This paper is focused on the possibility of using magnetite powders obtained by che...
The interaction of arsenite (As(III)) and arsenate (As(V)) with magnetite nanoparticles has been stu...
By a chemical method, using a method offered by Massart, where as the use of initial solutions of ch...
Numerous studies have examined arsenic adsorption on varying adsorbents including iron oxides, alumi...
A novel magnetic adsorbent was synthesized by solvothermal method for the removal of arsenic from aq...
Magnetite nanoparticles (NPs) were synthetized by partial oxidation of hot Fe(II) sulfate aqueous so...
This paper addresses the possibility of using magnetite nanoparticles for sorption concentration of ...
Background: Zero-valent iron can control the sites contaminated Arsenic (V) used. The aim of this re...
Consumption of drinking water containing arsenic at concentrations even below the World Health Organ...
The surface chemistry of inorganic materials is of great significance in a number of industrially im...
Nanomaterials (typically 1~100nm in diameter) have been of considerable environmental attention due ...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Development of reliable, environmentally safe and economically advantageous methods of water purific...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Abstract Aims: Arsenic contamination of natural water resources has become an important environmen...
© The author(s). This paper is focused on the possibility of using magnetite powders obtained by che...
The interaction of arsenite (As(III)) and arsenate (As(V)) with magnetite nanoparticles has been stu...
By a chemical method, using a method offered by Massart, where as the use of initial solutions of ch...
Numerous studies have examined arsenic adsorption on varying adsorbents including iron oxides, alumi...
A novel magnetic adsorbent was synthesized by solvothermal method for the removal of arsenic from aq...
Magnetite nanoparticles (NPs) were synthetized by partial oxidation of hot Fe(II) sulfate aqueous so...
This paper addresses the possibility of using magnetite nanoparticles for sorption concentration of ...
Background: Zero-valent iron can control the sites contaminated Arsenic (V) used. The aim of this re...
Consumption of drinking water containing arsenic at concentrations even below the World Health Organ...
The surface chemistry of inorganic materials is of great significance in a number of industrially im...
Nanomaterials (typically 1~100nm in diameter) have been of considerable environmental attention due ...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Development of reliable, environmentally safe and economically advantageous methods of water purific...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Abstract Aims: Arsenic contamination of natural water resources has become an important environmen...