yesThe mechanical behavior of a coarse-grained (100 mm) nickel-base alloy nichrome (Ni-20%Cr) was studied in compression at temperatures ranging from 150 to 1000°C. It was shown that in the temperature interval of 300-600°C this alloy demonstrates the following features of mechanical behavior: i) positive temperature dependence of yield stress; ii) jerky flow associated with the Portevin-Le Chatelier (PLC) effect ; 3) very high value (115 MPa) of “threshold” stress at 650°C. These features of mechanical behavior can be related to short- range ordering (SRO). It was shown by differential scanning calorimetry that SRO takes place in this temperature range, causing PLC effect and positive temperature dependence of yield stress. In addition, SR...
yesThe microstructure evolution in a Ni-20%Cr alloy was examined during deformation at large strains...
The origins of thermal fatigue are first considered, with reference to the turbine blades of jet tur...
© 2021 Elsevier LtdWe report the mechanical and microstructural characteristics of a medium-entropy ...
The mechanical behavior of a coarse-grained (100 mm) nickel-base alloy nichrome (Ni-20%Cr) was studi...
Effect of temperature on mechanical properties of a Ni-20% Cr alloy with an initial grain size of 10...
The mechanisms of plastic deformation of Cr20Ni80 nichrome with an initial grain size of 80 мm were ...
Inconel 625 is a nickel-based alloy that is mainly used in high-temperature applications. Inconel 62...
The mechanical behaviour of a nickel alloy (Ni20Cr) is studied considering the number of grains acro...
This paper presents the results of an experimental programme to obtain the mechanical behaviour of t...
In this paper, the dynamic mechanical properties of GH4720Li nickel-base alloy under a large tempera...
The tensile properties of a Ni-Co-based superalloy were investigated from room temperature to 900 °C...
Pure Nickel, 80% Ni-20% Cr, 98% Ni-2% ThO₂ and 78% Ni-20% Cr-2% ThO₂ have been studied to compare th...
Stress relaxation research is very valuable as it provides information on how materials relieve stre...
Investigations of the plastic deformation mechanisms of Ni-W-based heavy alloys varying with increas...
In this paper, the results of investigations into, and of the analyses of, the hot deformation behav...
yesThe microstructure evolution in a Ni-20%Cr alloy was examined during deformation at large strains...
The origins of thermal fatigue are first considered, with reference to the turbine blades of jet tur...
© 2021 Elsevier LtdWe report the mechanical and microstructural characteristics of a medium-entropy ...
The mechanical behavior of a coarse-grained (100 mm) nickel-base alloy nichrome (Ni-20%Cr) was studi...
Effect of temperature on mechanical properties of a Ni-20% Cr alloy with an initial grain size of 10...
The mechanisms of plastic deformation of Cr20Ni80 nichrome with an initial grain size of 80 мm were ...
Inconel 625 is a nickel-based alloy that is mainly used in high-temperature applications. Inconel 62...
The mechanical behaviour of a nickel alloy (Ni20Cr) is studied considering the number of grains acro...
This paper presents the results of an experimental programme to obtain the mechanical behaviour of t...
In this paper, the dynamic mechanical properties of GH4720Li nickel-base alloy under a large tempera...
The tensile properties of a Ni-Co-based superalloy were investigated from room temperature to 900 °C...
Pure Nickel, 80% Ni-20% Cr, 98% Ni-2% ThO₂ and 78% Ni-20% Cr-2% ThO₂ have been studied to compare th...
Stress relaxation research is very valuable as it provides information on how materials relieve stre...
Investigations of the plastic deformation mechanisms of Ni-W-based heavy alloys varying with increas...
In this paper, the results of investigations into, and of the analyses of, the hot deformation behav...
yesThe microstructure evolution in a Ni-20%Cr alloy was examined during deformation at large strains...
The origins of thermal fatigue are first considered, with reference to the turbine blades of jet tur...
© 2021 Elsevier LtdWe report the mechanical and microstructural characteristics of a medium-entropy ...