yesBSUThe aim of the present work is to clarify the structural mechanisms leading to new grain evolution during hot to warm working. A Ni-20%Cr alloy was used as a typical single-phase metallic material having relatively high melting point and low stacking fault energ
In the present work, evolution of microstructure and crystallographic texture during cold rolling of...
In this study, effect of hot work on microstructure and mechanical properties of nickel based alloy ...
This paper discusses the development of columnar grains in as-deposited C-Mn-Ni(-Mo) low-carbon low-...
The aim of the present work is to clarify the structural mechanisms leading to new grain evolution d...
The structural mechanisms responsible for the development of new grains in a Ni-20%Cr alloy during h...
The mechanisms of plastic deformation of Cr20Ni80 nichrome with an initial grain size of 80 мm were ...
The formation of martensite (ε and α′) in metastable austenitic Fe-18Cr-(10-11.5)Ni alloys was inves...
The spontaneous martensitic transformations were investigated by using the Fe-base alloy containing ...
Effect of temperature on mechanical properties of a Ni-20% Cr alloy with an initial grain size of 10...
Microstructural evolution and dynamic recrystallization (DRX) behaviors of a Ni-Cr-Mo alloy were res...
The material studied consists of a series of alloys with a basic composition (weight %): 18Cr - 0.01...
The hot deformation characteristics of IN 600 nickel alloy are studied using hot compression testing...
The microstructural evolutions of Ni-30Fe alloys during hot deformation are investigated. Hot-deform...
The property of polycrstalline nickel alloys are crucially dependent upon grain boundaries, as they ...
The change in free-energy attendant upon the athermal and the isothermal transformations of austenit...
In the present work, evolution of microstructure and crystallographic texture during cold rolling of...
In this study, effect of hot work on microstructure and mechanical properties of nickel based alloy ...
This paper discusses the development of columnar grains in as-deposited C-Mn-Ni(-Mo) low-carbon low-...
The aim of the present work is to clarify the structural mechanisms leading to new grain evolution d...
The structural mechanisms responsible for the development of new grains in a Ni-20%Cr alloy during h...
The mechanisms of plastic deformation of Cr20Ni80 nichrome with an initial grain size of 80 мm were ...
The formation of martensite (ε and α′) in metastable austenitic Fe-18Cr-(10-11.5)Ni alloys was inves...
The spontaneous martensitic transformations were investigated by using the Fe-base alloy containing ...
Effect of temperature on mechanical properties of a Ni-20% Cr alloy with an initial grain size of 10...
Microstructural evolution and dynamic recrystallization (DRX) behaviors of a Ni-Cr-Mo alloy were res...
The material studied consists of a series of alloys with a basic composition (weight %): 18Cr - 0.01...
The hot deformation characteristics of IN 600 nickel alloy are studied using hot compression testing...
The microstructural evolutions of Ni-30Fe alloys during hot deformation are investigated. Hot-deform...
The property of polycrstalline nickel alloys are crucially dependent upon grain boundaries, as they ...
The change in free-energy attendant upon the athermal and the isothermal transformations of austenit...
In the present work, evolution of microstructure and crystallographic texture during cold rolling of...
In this study, effect of hot work on microstructure and mechanical properties of nickel based alloy ...
This paper discusses the development of columnar grains in as-deposited C-Mn-Ni(-Mo) low-carbon low-...
DOI
Add to ORKG