Study Of The Influence Of Savinase®evity16l Enzyme On Biofilms Formation Of Staphylococcus Aureus On Stainless Steel With Different Roughness

Microbial films formation on the dairy equipment creates a serious problem, because they are difficult to eliminate by washing and disinfecting means that results in contaminating dairy products by microorganisms. The aim of the work was to study the influence of Savinase®Evity 16L proteolytic enzyme on the process of destructing biofilms, formed by Staphylococcus aureus on stainless steel with different surface roughness. It has been established, that surface roughness of stainless steel influences the process of Savinase®Evity 16L enzyme penetration in a hollow and prevents the destruction of the biofilm matrix, created by Staphylococcus aureus.It has been revealed, that after the influence of a proteolytic enzyme on Staphylococcus aureus biofilms, created on steel with roughness 0,16±0,018 mcm, the density decreased in 4,0 times (р≤0,05), comparing with a condition before processing. At roughness 0,63±0,087 mcm the density of formed biofilms decreased at the effect of Savinase®Evity 16L in 3,3times (р≤0,05) and the biofilm was characterized as a weak one. At the same time at stainless steel surfaces with roughness 2,68–0,95mcm, the density of biofilms decreased in 2,3–2,1times (р≤0,05), comparing with a condition before processing, and they were characterized as ones of the middle density. It has been also revealed, that the degradation intensity of biofilms under the influence of Savinase®Evity 16L enzyme at roughness 2,68–0,95 mcm was 1,7–1,9 times (р≤0,05) lower than at the surface with roughness 0,16±0,018 mcm.So, the revealed degradation features of a biofilm, created by Staphylococcus aureus at surfaces of stainless steel of different roughness at the influence of Savinase®Evity 16L proteolytic enzyme give a possibility to substantiate the addition of proteolytic enzymes to the composition of washing means for dairy production. It is also offered to process the surface to the roughness no more than 0,63 mcm for producing food steel for raising the effectiveness of biofilms destruction by enzymes and for the sanitary processing