Objective The objective of this thesis was to compare the coating properties of the English and domestic clays. Specifically, it was intended to note which set of clays excelled, if either, in the various properties tested. Furthermore, it would be observed from the results in which properties the primary clays (English) and the secondary clays (domestic) were in close agreement. The experimental work was designed to eliminate as many variables as possible with the exception of the type of clay used
This paper investigates the effect of clay content on the shear strength of clay–sand mixtures. Bent...
Several samples of raw clay from Augusta County, Virginia were analyzed, and one was chosen to devel...
This investigated is conducted to study the effect of adding of marble dust and polymer (Styr...
Objective The objective of this thesis was to compare the coating properties of the English and dome...
The chief reason for this work was to investigate the effect of a high velocity shear imparted to a ...
The importance of the continuous-film forming properties of the polymer via fusion upon heating is s...
The starch-clay suspension is the basis for the coating industry. This study shows that cationic and...
This paper covers the effect of shear by a sigma blade kneader on the optical properties of a given ...
Clays are employed in a wide variety of industries such as ceramic industry, manufacture of paper, r...
In this manuscript a model was proposed in order to predict the extent of the latex spreading on cla...
There are two aims in this thesis: the first is to ascertain something of the physical and chemical ...
In rainy climates, the external surfaces of earthen buildings suffer water erosion. In this paper, t...
Polymeric organic dispersants are now being used to replace all or part of the inorganic dispersants...
The air temperatures and velocities were varied in the tunnel dryer of a commercial coater to determ...
The objective of this thesis is to determine the effects that various pigments and binders have on t...
This paper investigates the effect of clay content on the shear strength of clay–sand mixtures. Bent...
Several samples of raw clay from Augusta County, Virginia were analyzed, and one was chosen to devel...
This investigated is conducted to study the effect of adding of marble dust and polymer (Styr...
Objective The objective of this thesis was to compare the coating properties of the English and dome...
The chief reason for this work was to investigate the effect of a high velocity shear imparted to a ...
The importance of the continuous-film forming properties of the polymer via fusion upon heating is s...
The starch-clay suspension is the basis for the coating industry. This study shows that cationic and...
This paper covers the effect of shear by a sigma blade kneader on the optical properties of a given ...
Clays are employed in a wide variety of industries such as ceramic industry, manufacture of paper, r...
In this manuscript a model was proposed in order to predict the extent of the latex spreading on cla...
There are two aims in this thesis: the first is to ascertain something of the physical and chemical ...
In rainy climates, the external surfaces of earthen buildings suffer water erosion. In this paper, t...
Polymeric organic dispersants are now being used to replace all or part of the inorganic dispersants...
The air temperatures and velocities were varied in the tunnel dryer of a commercial coater to determ...
The objective of this thesis is to determine the effects that various pigments and binders have on t...
This paper investigates the effect of clay content on the shear strength of clay–sand mixtures. Bent...
Several samples of raw clay from Augusta County, Virginia were analyzed, and one was chosen to devel...
This investigated is conducted to study the effect of adding of marble dust and polymer (Styr...