Low cost scalable monolithic common path probe design for the application in endoscopic optical coherence tomography

Endoscopic optical coherence tomography is an interference based imaging technique which due to its micron level resolution ability found several applications in medical diagnostics. However, the standard image performance suffers from artefacts caused by dispersion imbalance and polarisation mismatches between reference and sample arm. Such artefacts can be minimised with the use of a special class of probes called common path probes where the reference surface is placed in the vicinity of the sample. Previously reported common path probes suffered from a compromise between sensitivity and resolution. In most cases, proposed probes were not scalable for industrial applications and required sophisticated machines for fabrication, thus limiting their mass production for clinical use. We propose and demonstrate a simple fabrication procedure which would allow small laboratories and industries to mass produce common path probes. Our probe design is based on a thin gold layer within the probe which acts as a reference surface. Low-cost ball lenses were used to focus the signal on the sample. We achieved a sensitivity of 104 dB with the designed probes which is comparable to previously reported common path and non-common path probes. Imaging of biological samples such as pig's oesophagus and pig's coronary artery is also presented