Highly textured La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) films with columnar structure were grown by pulsed laser deposition on (001) NdGaO3 and SrTiO3 buffered (001) MgO substrates. Combined analysis of the films structure and morphology and EIS measurements showed that the transport properties are mainly limited by perpendicular grain boundaries effects. Increasing the film thickness, columnar nanosized grains tend to coalesce leading to a decrease of grain boundary concentration, hence to enhanced conductivity
Oxide interfaces can introduce properties that are different compared to thecorresponding crystal bu...
Nowadays, solid oxide fuel cells (SOFC) have drawn expanding consideration as an option framework fo...
The thickness dependence of microstructures of La0.8Ca0.2MnO3 (LCMO)/SrTiO3 (STO) thin films was inv...
Highly textured La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) films with columnar structure were grown by pulsed las...
Highly textured thin La0.8Sr0.2Ga0.8Mg0.2O3 films were grown by pulsed laser deposition on SrTiO3 bu...
DoctorIn SOFC, one of the most important issues is to decrease the operating temperature of SOFC. Lo...
xv, 133 leaves : ill. ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M AP 2006 WongThe emergence of...
In order to perform the electrical characterisation of the electrolyte thick (about 100 mum) films, ...
Many efforts are being made to tune perovskite thin film cathodes toward improving their oxygen redu...
Electrolyte thin films of Ce0 8Gd0 2O 1 9-δ; (GDC20) were deposited by pulsed laser deposition (PLD...
La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) precursor particles were successfully prepared by ultrasonic spray p...
The goals of this work were to synthesize high performance perovskite based thin film solid oxide fu...
For the prospective use as micro-Solid Oxide Fuel Cell (μ-SOFC) cathodes and for the investigation o...
In this study, La0.6Sr0.4CoO3-d (LSC) thin films were deposited by pulsed DC magnetron sputtering at...
Layered perovskites have attracted abundant interest as advanced cathode materials for intermediate-...
Oxide interfaces can introduce properties that are different compared to thecorresponding crystal bu...
Nowadays, solid oxide fuel cells (SOFC) have drawn expanding consideration as an option framework fo...
The thickness dependence of microstructures of La0.8Ca0.2MnO3 (LCMO)/SrTiO3 (STO) thin films was inv...
Highly textured La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) films with columnar structure were grown by pulsed las...
Highly textured thin La0.8Sr0.2Ga0.8Mg0.2O3 films were grown by pulsed laser deposition on SrTiO3 bu...
DoctorIn SOFC, one of the most important issues is to decrease the operating temperature of SOFC. Lo...
xv, 133 leaves : ill. ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M AP 2006 WongThe emergence of...
In order to perform the electrical characterisation of the electrolyte thick (about 100 mum) films, ...
Many efforts are being made to tune perovskite thin film cathodes toward improving their oxygen redu...
Electrolyte thin films of Ce0 8Gd0 2O 1 9-δ; (GDC20) were deposited by pulsed laser deposition (PLD...
La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) precursor particles were successfully prepared by ultrasonic spray p...
The goals of this work were to synthesize high performance perovskite based thin film solid oxide fu...
For the prospective use as micro-Solid Oxide Fuel Cell (μ-SOFC) cathodes and for the investigation o...
In this study, La0.6Sr0.4CoO3-d (LSC) thin films were deposited by pulsed DC magnetron sputtering at...
Layered perovskites have attracted abundant interest as advanced cathode materials for intermediate-...
Oxide interfaces can introduce properties that are different compared to thecorresponding crystal bu...
Nowadays, solid oxide fuel cells (SOFC) have drawn expanding consideration as an option framework fo...
The thickness dependence of microstructures of La0.8Ca0.2MnO3 (LCMO)/SrTiO3 (STO) thin films was inv...