Add to ORKGAn original process for the preparation of YSZ dense films with a thickness lower than 10 μm over NiO-YSZ substrates is presented. This process involves the preparation of a green membrane of NiO-YSZ and subsequent electrophoretic deposition (EPD) of commercial YSZ powder on this polymer-rich membrane. A single thermal treatment allowed removal of the organic compounds, sintering of the layers and full densification of the electrolyte. © 2005 Materials Research Society
In present work, three different methods were used for conducting the anodes. First, a thin layer of...
Screen printing pastes based on organic binder systems were developed for the production of dense el...
Lanthanum gallate based perovskite oxides are primary candidates for electrolyte materials for inter...
An original process for the preparation of YSZ dense films with a thickness lower than 10 μm over Ni...
An original process for the preparation of YSZ dense films with a thickness lower than 10 µm over Ni...
AbstractIn this report, a strategic approach for preparation of dense 8YSZ electrolyte layer on poro...
A process for the preparation of anode-electrolyte assemblies for IT-SOFCs is presented. This proces...
One of the main problems in the fabrication of anode supported solid oxide fuel cells is related to ...
Solid oxide fuel cells are promising hydrogen energy devices. The goal of this research was to creat...
Thin films of 8 mol% yttria stabilised zirconia (YSZ) electrolyte have been deposited on non-conduct...
Received: 05.11.22. Revised: 01.12.22. Accepted: 02.12.22. Available online: 09.12.22.Ceramic layers...
Electrophoretic deposition (EPD) of 8mol% yttria-stabilized zirconia (YSZ) electrolyte thin film has...
There has been much attention for solid oxide fuel cells (SOFCs) composed of ceramic materials in th...
Preparation of yttria-stabilised zirconia (YSZ) thick films is a critical point in fabrication of de...
Abstract: Yttria stabilized zirconia (YSZ) has been widely used as electrolyte in solid oxide fuel c...
In present work, three different methods were used for conducting the anodes. First, a thin layer of...
Screen printing pastes based on organic binder systems were developed for the production of dense el...
Lanthanum gallate based perovskite oxides are primary candidates for electrolyte materials for inter...
An original process for the preparation of YSZ dense films with a thickness lower than 10 μm over Ni...
An original process for the preparation of YSZ dense films with a thickness lower than 10 µm over Ni...
AbstractIn this report, a strategic approach for preparation of dense 8YSZ electrolyte layer on poro...
A process for the preparation of anode-electrolyte assemblies for IT-SOFCs is presented. This proces...
One of the main problems in the fabrication of anode supported solid oxide fuel cells is related to ...
Solid oxide fuel cells are promising hydrogen energy devices. The goal of this research was to creat...
Thin films of 8 mol% yttria stabilised zirconia (YSZ) electrolyte have been deposited on non-conduct...
Received: 05.11.22. Revised: 01.12.22. Accepted: 02.12.22. Available online: 09.12.22.Ceramic layers...
Electrophoretic deposition (EPD) of 8mol% yttria-stabilized zirconia (YSZ) electrolyte thin film has...
There has been much attention for solid oxide fuel cells (SOFCs) composed of ceramic materials in th...
Preparation of yttria-stabilised zirconia (YSZ) thick films is a critical point in fabrication of de...
Abstract: Yttria stabilized zirconia (YSZ) has been widely used as electrolyte in solid oxide fuel c...
In present work, three different methods were used for conducting the anodes. First, a thin layer of...
Screen printing pastes based on organic binder systems were developed for the production of dense el...
Lanthanum gallate based perovskite oxides are primary candidates for electrolyte materials for inter...