Carbon nanotubes (CNTs), with their excellent electronic properties and extremely high aspect ratio, represent an ideal material for building electron sources based on field emission. Fowler-Nordheim equation describes quite successfully the field emission phenomenon, especially for single or isolated tips. However, some complications arise when populations of CNTs are considered, where collective effects and large variability in the emitters features influence the measured I–V characteristics. In this work, the emission properties of multi-walled CNTs grown within ordered anodic alumina templates are investigated. These CNT matrices produce current densities up to some tens of mA/cm2, and the field enhancement factor for collec...
Atomic force microscopy (AFM) was used to study the field emission (FE) properties of a dense array ...
[[abstract]]Well-aligned and randomly grown multiwall nanotubes (MWNTs) fabricated by the radio-fiel...
Field evaporation was used in the post-fabrication treatment of a carbon nanotubes (CNTs) array and ...
Carbon nanotubes (CNTs), with their excellent electronic properties and extremely high aspect ratio...
Large-area, graphitized, and patterned carbon nanotube (CNT) arrays were prepared via cracking of et...
Carbon Nanotubes (CNTs) grown on substrates are potential electron sources in field emission applica...
Field Emission (FE) properties of vertically aligned Carbon Nanotubes (CNTs) grown in a nanoporous a...
Today the most mature technology to produce gated micro field electron emitter arrays is the so-call...
Carbon nanotube (CNT) emitters were formed on line-patterned cathodes in microtrenches through a the...
Individual multiwalled carbon nanotube (CNT) emitters were fabricated on a Si substrate by electron-...
The electron field emission characteristics of individual multiwalled carbon nanotubes were investig...
Field Emission properties of aligned bundles of SWCNTs decorated by nanodiamond grains have been exp...
Carbon nanotubes (CNTs) were synthesized by a DC thermal plasma method. After optimizing the synthes...
Carbon nanotubes (CNT) were firstly discovered by Iijima in 1991. An ideal nanotube can be conside...
Carbon nanotube (CNT) possesses various unique properties such as a needle-like shape with nanometer...
Atomic force microscopy (AFM) was used to study the field emission (FE) properties of a dense array ...
[[abstract]]Well-aligned and randomly grown multiwall nanotubes (MWNTs) fabricated by the radio-fiel...
Field evaporation was used in the post-fabrication treatment of a carbon nanotubes (CNTs) array and ...
Carbon nanotubes (CNTs), with their excellent electronic properties and extremely high aspect ratio...
Large-area, graphitized, and patterned carbon nanotube (CNT) arrays were prepared via cracking of et...
Carbon Nanotubes (CNTs) grown on substrates are potential electron sources in field emission applica...
Field Emission (FE) properties of vertically aligned Carbon Nanotubes (CNTs) grown in a nanoporous a...
Today the most mature technology to produce gated micro field electron emitter arrays is the so-call...
Carbon nanotube (CNT) emitters were formed on line-patterned cathodes in microtrenches through a the...
Individual multiwalled carbon nanotube (CNT) emitters were fabricated on a Si substrate by electron-...
The electron field emission characteristics of individual multiwalled carbon nanotubes were investig...
Field Emission properties of aligned bundles of SWCNTs decorated by nanodiamond grains have been exp...
Carbon nanotubes (CNTs) were synthesized by a DC thermal plasma method. After optimizing the synthes...
Carbon nanotubes (CNT) were firstly discovered by Iijima in 1991. An ideal nanotube can be conside...
Carbon nanotube (CNT) possesses various unique properties such as a needle-like shape with nanometer...
Atomic force microscopy (AFM) was used to study the field emission (FE) properties of a dense array ...
[[abstract]]Well-aligned and randomly grown multiwall nanotubes (MWNTs) fabricated by the radio-fiel...
Field evaporation was used in the post-fabrication treatment of a carbon nanotubes (CNTs) array and ...