In this study we describe the first direct, real-space characterization of a novel type of poly(vinyl alcohol) (PVA) based microballoons in aqueous environment using scanning transmission X-ray microscopy (STXM). From the oxygen K-edge near-edge X-ray absorption fine structure (NEXAFS) spectra taken from the microballoon interiors we could unambiguously distinguish between water- and air-filled particles. We also demonstrate that STXM imaging below and above the O K-edge (520 eV and 550 eV) can provide unique information on the composition of microballoons in water. It was found that the particular microballoon system investigated here has a remarkable high stability and is able to contain gases for more than 6 months, making it well suited...
We performed feasibility tests of photoelectron emission spectromicroscopy of wet samples in the wat...
Previous very successful soft X-ray microscopy tomography experiments [1-3] have been performed at a...
A microporous layer (MPL) is typically added to the gas diffusion layer of polymer electrolyte fuel ...
In this study we describe the first direct, real-space characterization of a novel type of poly(viny...
We report on the quantitative analysis of scanning transmission X-ray microscopy (STXM) images of ga...
We use scanning-transmission X-ray microspectroscopy (STXM) for in situ characterization of the phys...
Gas filled hollow microparticles, i.e., microbubbles and microballoons, are soft matter devices used...
The transport of water in soft materials can occur in liquid or gas phase and is highly dependent on...
ABSTRACT: Core-shell polymer microspheres have been prepared by a two-step precipitation polymeri-za...
Soft porous matter is commonly encountered in artificial tissue applications, pharmaceuticals delive...
High resolution scanning soft X-ray transmission microscopy (STXM) has been employed to investigate ...
We performed feasibility tests of photoelectron emission spectromicroscopy of wet samples in the wat...
Previous very successful soft X-ray microscopy tomography experiments [1-3] have been performed at a...
A microporous layer (MPL) is typically added to the gas diffusion layer of polymer electrolyte fuel ...
In this study we describe the first direct, real-space characterization of a novel type of poly(viny...
We report on the quantitative analysis of scanning transmission X-ray microscopy (STXM) images of ga...
We use scanning-transmission X-ray microspectroscopy (STXM) for in situ characterization of the phys...
Gas filled hollow microparticles, i.e., microbubbles and microballoons, are soft matter devices used...
The transport of water in soft materials can occur in liquid or gas phase and is highly dependent on...
ABSTRACT: Core-shell polymer microspheres have been prepared by a two-step precipitation polymeri-za...
Soft porous matter is commonly encountered in artificial tissue applications, pharmaceuticals delive...
High resolution scanning soft X-ray transmission microscopy (STXM) has been employed to investigate ...
We performed feasibility tests of photoelectron emission spectromicroscopy of wet samples in the wat...
Previous very successful soft X-ray microscopy tomography experiments [1-3] have been performed at a...
A microporous layer (MPL) is typically added to the gas diffusion layer of polymer electrolyte fuel ...