Experimental study of relationship between interfacial electroadhesive force and applied voltage for different substrate materials

An experimental investigation into the relationship between the interfacial electroadhesive force and applied voltage up to 20 kV has been presented. Normal electroadhesive forces have been obtained between a double-electrode electroadhesive pad and three optically flat and different substrate materials: glass, acrylic, and polycarbonate. The results have shown that not all substrate materials are good for the generation of electroadhesive forces. Only 15.7 Pa has been obtained between the pad and the polycarbonate substrate under 20 kV, whereas 46.3 Pa and 123.4 Pa have been obtained on the acrylic and glass substrate, respectively. Based on the experimental data, empirical models, with an adjusted R-square value above 0.995 in all cases, have been obtained for the three substrates. However, it has not been possible to develop a general empirical model which is suitable for all substrates. This further indicates the need for a large quantity of experimental data to obtain robust empirical models for different substrate materials in order to reliably use electroadhesive technologies for material handling applications