The effect of SiC addition on the crystallization kinetics of atmospheric plasma sprayed basalt-based coatings

The crystallisation kinetics of the conversion of a glass coating layer made from a mixture of natural basalt volcanic rock and SiC into glass-ceramic have been investigated. The process depends on the crystallisation temperature, time and amount of the SiC added. Coating powders were prepared from pure basalt and from basalt containing 10-50 wt% SiC. The powders were coated by an atmospheric plasma spray technique on the pre-coated AISI 1040 steel substrate with Ni-Al. The coating layer was vitrified by sudden cooling. The amorphous structure of the coatings was verified by X-ray diffraction (XRD) analysis. To obtain glass-ceramic, coatings were subjected to crystallisation heat treatment in an argon atmosphere. Crystallisation heat treatment temperatures of 800 degrees C, 900 degrees C and 1000 degrees C were chosen by using DTA. After the heat treatment process, augite, ferrian-diopsite, diopside, albite, andesine, and moissonite phases formed in the coating layer and were verified by XRD analysis. The crystallisation activation energies were determined to be between 323.4 kJ/mol and 253.2 kJ/mol, depending on SiC addition. The crystallisation activation energies decreased with increasing amounts of SiC addition. The Avrami parameters of the crystallisation process varied between 1.60 and 3.33, which indicates that internal crystallisation dominated for all of the compositions. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.https://doi.org/10.1016/j.ceramint.2012.05.03