Ceramic wall tiles, which are the most popular wall coverings, are especially used for internal applications due to their high porosity and high water absorption. When the tile body absorbs water after laying, water mark problem, which is a common phenomenon in ceramic tiles, occurs. The aim of this study was to increase the current understanding about how the engobe characteristics (opacity, fusibility, permeability) and the type of frit used in engobe compositions influence the water mark formation of a wall tile body. For this purpose, mainly three different types of engobe compositions were developed by using diopside-based, zircon-based, and titanium-based frits. The sintering behaviors of frits and engobes were characterized by using ...
Due to the fact that there are various types of wall tiles in the Egyptian market, of different qual...
Water vapour flux into the porous microstructure represents a crucial factor capable of influencing ...
This article reports the characterisation and optimisation of glass-ceramic coatings plasina-sprayed...
The article presents the results of experiments to determine the interconnection between water imper...
none3noSince the arrival of lapped porcelain stoneware tiles on the market, several studies have bee...
Zircon is the main opacifier in the ceramic sector, however its high cost limits its wide use and ha...
The 2030 Agenda for Sustainable Development charts the course for transforming the world socially, e...
In this study, sol-gel based ZrO2 nano coating was made on the surface of glazed ceramic tile by spi...
Since the arrival of lapped porcelain stoneware tiles on the market, several studies have been focus...
Recent market trends for porcelain stoneware tiles indicate that there is a growing interest for lig...
<div><p>This work evaluated the water absorption of glazed porcelain stoneware ceramic tiles using t...
The paper presents a completely new composition of the ceramic mass for production of ceramic tiles ...
Katı yüzeylerin ıslatılabilirliği yüzey kompozisyonu ve yüzey topolojisi ile kontrol edilmektedir. S...
The development of ceramic tiles with humidity regulating capacity is a topic of great interest for ...
The aim of this study is to fabricate and characterize lightweight porcelain tiles by tri-layer pres...
Due to the fact that there are various types of wall tiles in the Egyptian market, of different qual...
Water vapour flux into the porous microstructure represents a crucial factor capable of influencing ...
This article reports the characterisation and optimisation of glass-ceramic coatings plasina-sprayed...
The article presents the results of experiments to determine the interconnection between water imper...
none3noSince the arrival of lapped porcelain stoneware tiles on the market, several studies have bee...
Zircon is the main opacifier in the ceramic sector, however its high cost limits its wide use and ha...
The 2030 Agenda for Sustainable Development charts the course for transforming the world socially, e...
In this study, sol-gel based ZrO2 nano coating was made on the surface of glazed ceramic tile by spi...
Since the arrival of lapped porcelain stoneware tiles on the market, several studies have been focus...
Recent market trends for porcelain stoneware tiles indicate that there is a growing interest for lig...
<div><p>This work evaluated the water absorption of glazed porcelain stoneware ceramic tiles using t...
The paper presents a completely new composition of the ceramic mass for production of ceramic tiles ...
Katı yüzeylerin ıslatılabilirliği yüzey kompozisyonu ve yüzey topolojisi ile kontrol edilmektedir. S...
The development of ceramic tiles with humidity regulating capacity is a topic of great interest for ...
The aim of this study is to fabricate and characterize lightweight porcelain tiles by tri-layer pres...
Due to the fact that there are various types of wall tiles in the Egyptian market, of different qual...
Water vapour flux into the porous microstructure represents a crucial factor capable of influencing ...
This article reports the characterisation and optimisation of glass-ceramic coatings plasina-sprayed...