Exposure Assessment in Millimeter-Wave Reverberation Chamber Using Murine Phantoms

International audienceThis study deals with the design and calibration of the first mode-stirred reverberation chamber (RC) in the 60-GHz-band adapted for in vivo bioelectromagnetic studies. In addition to the interface for electromagnetic and thermal dosimetry, the interfaces for lighting and ventilation were integrated into the RC walls while preserving acceptable shielding. The RC with mechanical and electronic steering capabilities is characterized in the 55-65 GHz range. To this end, murine skin-equivalent phantoms of realistic shape were designed and fabricated. Their complex permittivity is within +/- 12% of the target value of murine skin (6.19-j5.81 at 60 GHz). The quality factor of the RC loaded with an animal cage, bedding litter, and five murine phantoms was found to be 1.2 x 10(4). The losses inside the RC were analyzed, and it was demonstrated that the main sources of the power dissipation were the phantoms and mice cage. The input power required to reach the average incident power density of 1 and 5 mW/cm(2) was found to be 0.23 and 1.14 W, respectively. Surface heating of the mice models was measured in the infrared (IR) range using a specifically designed interface, transparent at IR and opaque at millimeter waves (mmW). Experimental results were compared with an analytical solution of the heat transfer equation and to full-wave computations. Analytical and numerical results were in very good agreement with measurements (the relative deviation after 90 min of exposure was within 4.2%). Finally, a parametric study was performed to assess the impact of the thermophysical parameters on the resulting heating. Bioelectromagnetics. (c) 2020 Bioelectromagnetics Societ