Add to ORKGMicrostructural evolution during cold sheet rolling to 80% thickness strain and annealing at 600-1100° C for 30 min of the CoCrFeNiMn high entropy alloy doped with 1 at.% of C and resulting mechanical properties of the alloy are reporte
Effect of annealing of a cold-worked CoCrFeMnNi alloy at temperatures of 500-900°C for 1-50 h on the...
A CoCrFeNiMn high-entropy alloy (HEA) was processed by equal-channel angular pressing (ECAP) for up ...
In this work, the effect of carbon content on the structure and mechanical properties of Fe(₅₀-x)Mn₃...
The effect of cold rolling to 80% thickness reduction and annealing at 973-1373 K for 1h our on the ...
Microstructural evolution during cold sheet rolling to 80% thickness strain and annealing at 600-110...
The effect of carbon content (x = 0, 0.5, and 2.0 at.%) on the phase composition, microstructure, an...
The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containin...
Therefore in this work we examined cryogenic tensile behavior of the fcc high entropy alloys with di...
The CoCrFeNiMn multicomponent is one of the most widely and best studied of all high-entropy alloys ...
The effect of nitrogen on the structure and mechanical behavior of a CoCrFeMnNi high-entropy alloy a...
The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containin...
A 1 at% carbon non-equiatomic doped Co19Cr5Fe38Ni19Mn19 high-entropy alloy was synthesized by vacuum...
The effect of carbon additions on the structure and mechanical properties of high-entropy alloys Co...
Butt-joint seam of a high entropy alloy (HEA) of the CoCrFeNiMn system was successfully obtained by ...
High entropy alloys (HEAs) have been the subject of numerous investigations during past 20 years. Va...
Effect of annealing of a cold-worked CoCrFeMnNi alloy at temperatures of 500-900°C for 1-50 h on the...
A CoCrFeNiMn high-entropy alloy (HEA) was processed by equal-channel angular pressing (ECAP) for up ...
In this work, the effect of carbon content on the structure and mechanical properties of Fe(₅₀-x)Mn₃...
The effect of cold rolling to 80% thickness reduction and annealing at 973-1373 K for 1h our on the ...
Microstructural evolution during cold sheet rolling to 80% thickness strain and annealing at 600-110...
The effect of carbon content (x = 0, 0.5, and 2.0 at.%) on the phase composition, microstructure, an...
The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containin...
Therefore in this work we examined cryogenic tensile behavior of the fcc high entropy alloys with di...
The CoCrFeNiMn multicomponent is one of the most widely and best studied of all high-entropy alloys ...
The effect of nitrogen on the structure and mechanical behavior of a CoCrFeMnNi high-entropy alloy a...
The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containin...
A 1 at% carbon non-equiatomic doped Co19Cr5Fe38Ni19Mn19 high-entropy alloy was synthesized by vacuum...
The effect of carbon additions on the structure and mechanical properties of high-entropy alloys Co...
Butt-joint seam of a high entropy alloy (HEA) of the CoCrFeNiMn system was successfully obtained by ...
High entropy alloys (HEAs) have been the subject of numerous investigations during past 20 years. Va...
Effect of annealing of a cold-worked CoCrFeMnNi alloy at temperatures of 500-900°C for 1-50 h on the...
A CoCrFeNiMn high-entropy alloy (HEA) was processed by equal-channel angular pressing (ECAP) for up ...
In this work, the effect of carbon content on the structure and mechanical properties of Fe(₅₀-x)Mn₃...